| Timeline | PROJECT: Cobra Roadster 5.0 10/11/2003 | Running Costs | Tools | Donor Debit/Credit |
| 10/10/2003 | CarFax | $24.99 | ||
| 10/11/2003 | Donor Car - 91' Mustang GT Fstbk, 5sp | $2,556.30 | $2,556.30 | |
| 10/11/2003 | Factory Five Instructioon Manual (credit $50 back when the kit is bought.) | $55.00 | ||
| 10/13/2003 | Chilton's Ford Mustang 1989-93 Repair Manual | $19.47 | ||
| 10/26/2003 | Adjustable Tilt Engine Sling | $43.98 | $43.98 | |
| 11/15/2003 | Edelbrock 600cfm w/electric choke PN 1406 (bought on Ebay) | $213.57 | ||
| 11/19/2003 | Found $1.18 in change under rear seats. | -$1.18 | -$1.18 | |
| 11/19/2003 | Harmonic Puller and Tube Bender | $21.63 | $21.63 | |
| 11/21/2003 | Thunderbird Super Coupe IRS and rear calipers; $300+ $45 shipping | $345.00 | ||
| 11/22/2003 | Wire wheels | $10.26 | $10.26 | |
| 11/23/2003 | Loc-ring pliers set and 3pc. Mini brushes | $14.38 | $14.38 | |
| 11/24/2003 | (10) 1/2"x20 x 1-31/32" wheel studs (for rear hub redrill) | $12.88 | ||
| 11/24/2003 | 6" 3-Jaw Gear Puller | $32.46 | $32.46 | |
| 11/25/2003 | Stuart Spencer - drill and press hubs ($75 for service, $4 MO charge and 13.87 shipping) | $92.87 | ||
| 11/25/2003 | Northern Tools: Engine Stand and Engine Cradle | $120.92 | $120.92 | |
| 11/28/2003 | IRS Polyurehtane bushing kit and IRS Alum. Diff. Bushing kit | $156.00 | ||
| 11/29/2003 | Channel Lock Lock-Ring pliers (these did NOT bend or snap!!!) | $21.64 | $21.64 | |
| 11/29/2003 | Wire Brush Stripper | $19.47 | $19.47 | |
| 12/2/2003 | Edelbrock Performer RPM #6025 (2.02" in./1.60" ex.) plus CompCam 1.6 ratio roller rocker arms, ARP Head Stud Kit #2354018, and pushrods. | $500.00 | ||
| 12/4/2003 | Edelbrock Performer Intake | $147.50 | ||
| 12/4/2003 | Torin Engine Crane and 4" gear puller | $151.53 | $151.53 | |
| 12/8/2003 | All Autometer Gauges except Fuel Level, all MSD igintion components, +8.44 handling fee. | $922.44 | ||
| 1/2/2004 | BBK Headers sold | -$52.86 | -$52.86 | |
| 1/10/2004 | 00' Spindles, PBR dual piston calipers, Goodrich SS lines | $250.00 | ||
| 1/21/2004 | Performance Tools Digital 6" caliper | $21.52 | $21.52 | |
| 1/22/2004 | 331 short block | $1,700.00 | ||
| 1/31/2004 | Duplicolor Engine Primer, Paint, Nitrile Gloves and Valve Spring compressor | $44.34 | ||
| 2/8/2004 | Craftsmen Lock Ring Pliers | $38.95 | $38.95 | |
| 2/8/2004 | 2' x 1-1/4" ID galvanized pipe (axle/CV removal) | $5.40 | ||
| 2/14/2004 | Central Pneumatic 40lb. Sand Blaster, Glass Bead and Alum. Oxide medai | $115.80 | $115.80 | |
| 2/21/2004 | Donor Car - 91' Mustang GT Fstbk, 5sp *SOLD* | -$550.00 | -$550.00 | |
| 2/22/2004 | Central Pneumatics 12 ton Shop Press | $97.41 | $97.41 | |
| 2/23/2004 | Central Pneumatics Sand Blasting Cabinet, air nipple, air gun | $73.58 | $73.58 | |
| 2/24/2004 | Brass Engine Plug set | $11.90 | ||
| 2/28/2004 | Propane Torch and misc. galv. Plumbing parts to remove rear IRS bearings | $38.17 | $38.17 | |
| 3/1/2004 | 11" Needle Nose Pliers | $27.05 | $27.05 | |
| 3/1/2004 | Timken JRM4249 rear bearings (Napa Auto Parts PN: BPFW115 | $97.40 | ||
| 3/3/2004 | Sold Edelbrock 600CFM & Performer RPM intake ($110.82 loss) | -$249.25 | ||
| 3/6/2004 | Strange Engineering 8.8" 3.55 ratio gearset | $100.00 | ||
| 3/12/2004 | Various Engine Gaskets, steel input sleeve (T5), engine dowels. | $213.00 | ||
| 4/2/2004 | Canton Road Racing Oil Pan w/pump pickup | $309.00 | ||
| 4/12/2004 | Tail housing O-rings and Yoke seal | $45.56 | ||
| 4/12/2004 | Professional Products "Hurricane" Intake Manifold (Vic.Jr. equivalent) | $192.00 | ||
| 4/12/2004 | Stainless Steel (F593C) Engine Bolt set (Carfast Products, Inc.) | $30.20 | ||
| 4/26/2004 | Caton Universal Dipstick kit (#20-850) | $27.49 | ||
| 5/7/2004 | ARP Balancer Bolt & Washer, #ARP-150-2501 ( 5/8" x 18"), $18.88 ARP CroMo black oxide oil pump drive shaft, #ARP-154-7904, $16.88 Ford chrome distributor hold-down clamp #FMS-M-12270-A302, $8.88 Summit Racing Oil Pump Primer Drive, 1/4" drive #SUM-901011 $12.95 S/H: $8.95 | $66.54 | ||
| 5/10/2004 | Cylinder Head Stand (Moroso) and Standard Abrasive's Porting/Polishing Kit | $65.78 | $65.78 | |
| 5/25/2004 | Lobak Mufflers for side pipes | $126.00 | ||
| 6/4/2004 | Ford Timing Chain Cover E3A-6059-AB (first unit was $36 but I cracked it.) | $70.00 | ||
| 6/5/2004 | CompCam #K-35-518-8 (extreme engergy XE274H): $670, FRPP # M-9600-A302 (13" Air Cleaner kit): $43, Fuel Pump Block Off Plate $3.00, FRPP #M 6582 E302 (Alum. Valve Covers): $98, Oil Filter Adapter for 5.0 block: $5, S/H: $39 | $871.00 | ||
| 6/13/2004 | Valve Spring Compressor, Double Flare Tool, Reciprocating Valve Grinding tool (Craftsmen) and Valve Lapping Compound | $64.67 | $64.67 | |
| 6/23/2004 | Gumout Carb Cleaner | $6.47 | ||
| 6/23/2004 | Holley Street Avenger #080670 (elec. Choke.) | $310.00 | ||
| 7/1/2004 | Return Lifter Guide Kit to Fortes | $7.70 | ||
| 7/9/2004 | CompCam Degree Kit #4796, Pushrod Length Checker #7701-1, Pro-Cam Lube (4 oz.) #152 | $175.81 | $175.81 | |
| 7/19/2004 | ARP Flywheel Bolt #200-2802, ARP Camshaft Bolt #254-1001 (pro-series), ARP SS Carb. Studs and Nuts #400-2401 (std. Size), Holley Fuel Pressure Gauge #26-500, Holley 4150 dual feed chrome fuel line #34-150, $8.95 shipping/handling. | $87.49 | ||
| 7/20/2004 | Five Star Ford: Harmonic Balancer M-6316-A50 ($265), Needle bearing pilot bearing ($8.10), FRPP Breather Caps M-6766-B302 ($10.30), FRPP Chrome Coil bracket M12044-A2 ($6.00), FRPP Cam Thrust Plate M-6269-A351 ($35.54), approx. $10 shipping | $334.94 | ||
| 7/28/2004 | Ford Racing Hardened Push Rods M-6565-L302, Summit Racing throttle return spring kit, CompCam's crankshaft socket #4798 | $99.17 | $38.78 | |
| 7/28/2004 | Ingersoll-Rand mini die grinder kit ( #307 die grinder w/stones) | $55.00 | $55.00 | |
| 8/10/2004 | 3 carbide die cutters | $40.00 | $40.00 | |
| 8/19/2004 | ARP Assy. Lube #100-9903, ARP Teflon Sealant #100-9904, ARP Thread Cleaners #911-0006, ARP Header Studs #100-1414 | $140.54 | $75.95 | |
| 8/25/2004 | Carb Cleaner, Brake Cleaner, 3/8-16 Helicoil Kit | $35.13 | $19.99 | |
| 9/9/2004 | CompCam .015" valve seat shims, T-shirt :) | $27.24 | ||
| 9/13/2004 | Advanced Welding, Inc. - Repair Cylinder Head damage | $75.00 | ||
| 9/14/2004 | K&N Oil Filters ( 2 @ $9.99), Champion Spark Plugs #17 ( 8 @ $1.19), Permatex dielectric grease | $32.04 | ||
| 9/17/2004 | R&M Specialties spark plug loom organizer, MSD Wire Markers #3414, MSD Mini Stripper Crimper #3503 | $55.79 | ||
| 9/17/2004 | T5 Bell Housing ( $50 - 13.45 ship - 1.75 PayPal Transaction | -$34.80 | -$34.00 | |
| 9/23/2004 | Heli-coil repair kit ( for 1/2"-18 thread repair on engine block. | $49.78 | ||
| 9/23/2004 | Mr. Gasket Breather Cap w/outlet tube, Edelbrock Water Pump #8843, Chrome Water Outlet #M-8592-B302 | $192.00 | ||
| 9/29/2004 | Prestone 180 deg. Thermostat | $10.27 | ||
| 10/28/2004 | POR-15 Complete kit w/Sterling Silver topcoat | $100.00 | ||
| 1/9/2005 | 90 deg. Hose (thermostat hosing to water pump), hose clamps and intake plug kit | $15.77 | ||
| 1/17/2005 | March Pulley Set (#30180), March 15/16" spacer (#1433), Powermaster Chrome 100Amp 1-wire alternator | $612.17 | ||
| 2/4/2005 | 37 deg. Flaring tool, tube bender from Summit Racing. | $44.90 | $44.90 | |
| 2/14/2005 | Ford Racing Mini Starter # M-11000-A50, T2 Torsen Diff. # M-4204-T28, 8.8" Ring & Pinion Installation Kit # M-4201-B, 8.8" IRS Bearing & Seal Kit #M-4413-A, Metric Bolt ad Dowel kit (for flywheel) #M6397-A302 | $938.04 | ||
| 2/23/2005 | Rearend Specialties - install T2 ring & pinion, set pinion depth & backlash. | $150.00 | ||
| 2/27/2005 | U-Joint Removal Tool | $32.46 | $32.46 | |
| 3/7/2005 | T-Bird Rear Brakes (refurbished); Autozone: C278 & C279; old calipers used for cores ($70 per core) | $153.69 | ||
| 4/8/2005 | Energy Suspension polyurethane motor mounts #4-1124R, Lakewood Bellhousing #15203, Lakewood fork pivot bolt #15503 | $509.80 | ||
| 4/8/2005 | MC Brake Adapter fittings ( Weatherhead #7818 and #7909) | $7.01 | ||
| 4/8/2005 | FRPP Clutch Linkage w/fork #M-7553-A302, FRPP Clutch Bulkhead Adjuster #M7554-A, FRPP Aluminum Quadrant #M7583-A, FRPP King Cobra HD Clutch kit #M-7560-C302, Bellhousing fork shield #E6ZZ-7513-A | $305.71 | ||
| 5/14/2005 | Casters and misc. parts for wood cradle | $70.00 | $70.00 | |
| 5/20/2005 | Sold Mustang gas pedal | -$15.67 | -$15.67 | |
| 5/22/2005 | Fel-Pro Rear Main Seal #2922RS, Fel-Pro Intake Gaskets #1262, Bellhousing Dowels (lakewood 15945), toggle switch flip-up cover (red) | $68.46 | ||
| 5/31/2005 | Bellhousing off-set dowels ( lakewood 15960), toggle switch flip-up cover, brake-light pressure switch (Painless 80171), ARP Motor Mount bolts, #150-3102. | $57.50 | ||
| 6/4/2005 | Donor gas-filter bracket - $9.69 | -$9.69 | -$9.69 | |
| 6/11/2005 | Radiator Fan Shroud w/overflow - $25.00 | -$25.00 | -$25.00 | |
| 6/13/2005 | Steeda "Sports" Shifter (no lever) | $109.95 | ||
| 6/15/2005 | Mike Everson Shortened Brake Pedal w/core return | $24.32 | ||
| 6/27/2005 | Brake Distribution Block | -$1.25 | ||
| 7/11/2005 | CarTech Fuel Pickup Unit | $108.00 | ||
| 7/26/2005 | Mallory 140 Fuel Pump, Mallory 140 Fuel Filter, Mallory Fuel Pressure Regulator #4309 (4 ports + 1 return). Various 3/8 NPT-to-6AN/8AN | $384.96 | ||
| 8/15/2005 | 18:1 Steering Rack, Clutch fork extension, T5 vent, clutch cable clip | $247.00 | ||
| 9/1/2005 | Ron Davis Racing Radiator w/lower mounting bracket. | $700.00 | ||
| 10/14/2005 | FACTORY FIVE MKIII 65' ROADSTER | $15,673.00 | ||
| 10/14/2005 | Stewart-Transport | $1,500.00 | ||
| 10/20/2005 | Halibrand 17x10.5 and 17x9.5, Nitto NT555 245/45R-17 & 315/35R-17 | $1,381.00 | ||
| 10/21/2005 | Fortes's MkIII offset rack bushings, bumpsteer kit, cleckos and pliers | $236.00 | $38.00 | |
| 10/25/2005 | Clutch Fork (new) | -$21.43 | -$21.43 | |
| 10/26/2005 | 3/4" to 1/2" adapter, 1-3/8" socket | $22.71 | $22.71 | |
| 10/26/2005 | 2 x 3/8" spindle nuts for IRS ( FMCF874B477A) & in-tank filter for picku ( FMCF1ZZ9A011A) | $72.59 | ||
| 11/1/2005 | CV Boot bands and CV band pliers | $30.94 | $25.53 | |
| 11/7/2005 | Engine block bellhousing plate | -$13.47 | -$13.47 | |
| 11/7/2005 | Richard Oben Silicone CV boots (inner) | $50.00 | ||
| 11/11/2005 | Sold 40 gallon sand blaster | -$50.00 | -$50.00 | |
| 11/11/2005 | DynaTech "Vortex" cones, Painless Wiring Fan Relay w/Thermostat (185 deg. On, 170 deg. Off, PN: 30103) and Painless Wiring Fuel Pump Relay Kit (30131) | $232.54 | ||
| 12/5/2006 | Five Star Ford: Ujoint rebuild parts, front IFS bolts, caliper banjo bolts | $85.66 | ||
| 12/5/2005 | Returned Fuel Pump Relay and Fan Relay and Hawk Front pads | -$198.78 | ||
| 12/16/2005 | Received correct Hawk Front pads, PN: HB-274F-610 and Fan Thermostat sensor, PN: 30111 | $111.83 | ||
| 12/15/2005 | Breeze Automotive - front SS hose for PBR calipers, bracket clips | $53.85 | ||
| 12/29/2005 | Summit Racing: Lokar SS throttle cable, return spring bracket, wheel dollys, 3/8" NPT plugs, 2 45 deg. Fittings for fuel filter and pump | $238.49 | ||
| 1/3/2006 | Summit Racing: Flaming River Kill switch, various AN fittings | $144.92 | ||
| 1/6/2006 | I-Squared Engineering: 1+1 Power System | $769.00 | ||
| 1/16/2006 | Returned various Russell Fittings; exchanged for 45 deg. Swivel flare, speed bleeders | $0.00 | -$13.58 | |
| 1/21/2006 | Speed Merchant: 14' -8AN SS braided and 14' of -6AN SS braided, -6 AN hose end, -8 90 deg. Hose end. | $276.04 | ||
| 1/25/2006 | Returned unused AN fittings to Summit | -$27.00 | ||
| 1/26/2006 | Speed Merchant: -6 90 deg. AN swivel hose end., replc. Air-cleaner rod. | $22.59 | ||
| 1/31/2006 | Sold American Auto Wire System & misc. FFR "carb wiring" items | -$250.00 | ||
| 1/31/2006 | Souther Rods & Parts compact heater | $126.50 | ||
| 1/31/2006 | Quality Roadsters pass. And driver side vents | $50.00 | ||
| 2/3/2006 | South Bay Driveline (driveshaft | $159.49 | ||
| 2/4/2006 | Firewall Grommets, -8AN 45 deg. Swivel | $35.29 | ||
| 2/10/2006 | McMaster-Carr various toggle switches, 22mm round button housing | $178.67 | ||
| 2/14/2006 | Splitloom ( 1/2, 3/8 & 1/4), wire harnesses, Mini Cooper backup lamp | $59.21 | ||
| 2/16/2006 | Heater valve | $24.89 | ||
| 2/16/2006 | McMaster-Carr 1/4, 3/8, 1/2 and 3/4" split loom, horn button contact block | $56.83 | ||
| 2/16/2006 | Speed Merchant: 10' 5/8" heater hose, SS heater fitting (manifold) 1/2" NPT to 90 deg. 5/8" | $51.80 | ||
| 2/17/2006 | Optima Battery, Taylor SS flexible ground straps, Remote Battery Jumper terminals, flip-switch cover. | $147.81 | ||
| 2/21/2006 | Sold Mustang upper drive shaft, FFR Cone Filter, FFR Radiator, FFR Oil Filter rellocation kit | -$80.00 | -$10.00 | |
| Total Costs | $36,770.43 | $1,568.33 | $1,809.42 | |
| Net Cost of FFR (including credits and excluding tools): | $33,392.69 |