|
 |
Fatboy™
Length: 12.9" (32.8 cm)
Diameter: 2.6" (66 mm)
Weight: 3.0 oz (85 g)
Recovery: 18" Parachute
Fins: Balsa
Engines: B4-2, B6-2, C5-3, C6-3
This was a fun project. A neat little fat rocket!!!
<<Click Here for Fatboy Construction Images>> |
|
 |
Executioner™
Length: 38.5 in. (97.8 cm)
Diameter: 2.6" (66 cm)
Weight: 8.1 oz. (230 g)
Recovery: 24 in. (61 cm) parachute
Fins: T3 laser cut wood
Maximum Altitude: 590 ft. (180 m)
Recommended Engines: D12-3, E9-4, E9-6
This was the hardest rocket we have built yet
due to the extreme paint job. It looks great and the end
result is very rewarding.
<<Click Here for
Executioner Construction Images>> |
 |
Spinfin
Length: 12 in. / 30.5cm
Diameter: .984 in. / 25mm
Recovery: Parachute
Fin type: Balsa wood
Motors: A6-4 / B6-4 / C6-5
This rocket turned out great.
The fins and decals were tough, but Wingki
did a great job!
<<Click Here for Spinfin Construction Images>> |
 |
Navaho AGM
Length: 20.25 in. / 51.4cm
Diameter: .984 in. / 25mm
Recovery: Parachute
Fin type: Balsa wood
Upper Stage Motors: A6-4 / B6-2 / B6-4 /
C6-3/5
Booster Stage Motors: B6-0 / C6-0
Project started on August 22, 2006. Used
some new techniques for sanding and sealing
with mixed results.
<<Click Here for
Navaho AGM Construction Images>>
|
 |
Locator
I built a locator buzzer for our larger
rockets. It is my own design and I'm not sure if it is too
heavy or not. It uses a Piezo Buzzer and a replaceable 9V
battery. Currently there is no way to have it triggered by
the rocket. I will just plug the battery in before launch
and it will buzz the whole way. It is pretty loud and should
help in recovery.
<<Click Here for Locator Construction Images>> |
 |
Quark
Length: 5.2" (13.2 cm)
Diameter: 0.54" (13.7 mm)
Weight: 0.1 oz (3 g)
Recovery: Featherweight
Fins: Balsa
Maximum Altitude: 700 ft (213 m)
Recommended Engines: 1/4A3-3T, 1/2A3-4T(FF)*, A3-4T, A10-3T
I did not know they made rockets this small.
This thing is tiny. It says level one construction but
because of its size, it is a little more difficult.
<<Click Here for Quark Construction Images>> |
 |
Pip Squeak
Length: 7.25
in. / 18.4cm
Diameter: .787 in. / 20mm
Recovery: Streamer
Fin type: Balsa wood
Motors: A6-4 / B6-4 / C6-5
This one is complete. It
was one of the 8 we bought on sale. Wingki painted it red
different from the box. HOT!
<<Click Here for
Pip Squeak Construction Images>> |
