(2) Screw mounting brackets to player.
(3) Remove mounting clips from dash lower facia.
(4) Rock facia side-to-side to release upper clips.
(5) Unplug the auxilary power connector and tray lamp.
(6) Remove the cubby or existing CD unit.
(7) Unplug the radio connector.
(8) Plug in the "Y" cable.
(9) Connect the ground cable.
(10) Connect the adapter to the player.
(11) Slide player into dash opening.
(12) Screw down brackets.
(13) Plug Y-cable into interface board.
(14) Check the player operation.
(15) Drill a hole in the fascia.
(16) Insert the LED in fascia hole.
(17) Reinstall dash fascia.