Items you can buy.
If I don't have an item ready it usually doesn't take long for me to make one up. A delay only if parts are not on hand.
If you need an item you bought fixed it's usually $10.00 unless I need to replace many parts (totally fried).
Stuff you can buy
Sorry I don't have a shopping cart but if you email me I will be happy to quote price and delivery. Don't worry, I do not share or distibute anyone's email address. Payment via PayPal is preferred.
Target Circuit (T-1) with relay
-9 volt battery holder acts as a base to keep it upright.
-When fired upon two LEDs flash for a few seconds.
-Relay included to trigger other devices (sound module for sound).
-Use these as practice targets or as objectives in a game.
-Includes terminal block for connecting other devices.
$22.00
Battle Circuit
Intended for interaction with the Tamiya infrared battle system. Of course if you have two or more of these they will work with eachother.
-Selectable firing rate; 2, 3, 5 or 9 seconds between shots
-Select number of hits before disabled; 2,3, 5 or 9
-Four LEDs for hit detection (stay lit when circuit disabled)
-White gun flash LED for mounting in gun barrel
-Reset pushbutton
-Connections for additional interfacing; relay, sound module - email for additional information on availability of these additions.
$80.00
Trigger Board
For use with the Battle Circuit above. This connects between a standard radio receiver and the Battle Circuit. Triggers the Battle Circuit to fire by sensing when the maximum pulse width level is present. Usually connected to channel 5 or 6 but can be used with lower channels on a radio.
$12.00
Recoil Board
Use to simulate recoil of a cannon. Connect between a servo and the battle circuit. When the battle circuit fires a servo will recreate the action of a gun recoil. Contains a separate regulator for the servo.
This can also be used alone. There are three connections, power, ground and trigger. When the trigger wire is pulsed high the servo will activate. (Servo not included)
$ 27.00
rctankhobby.com
tankhobby.com
&
All pages, text, illustations, technical data on this page and all related pages belong to rctankhobby and tankhobby (.com, .net, and any other registered domains) and are the property of, and owned by Nick Chiocchio and cannot be copied, transcribed, transferred, forwarded or reproduced in any manner without permission.
SOLD OUT
Target Circuit (T-2) - sound, counter & relay
-Will count hits from 1 through 9, sets relay when count is reached.
-Sound module included for explosion sound when hit with ability to record your own.
-Detector and flash LEDs connect through cable assembly for separate mounting.
-Relay has normally open & normally closed contacts.
-DC output activates when hit, time adjustable from approximately 5 - 15 seconds.
A speaker is required for sound but not included.
$45.00
Alternate detector assembly shown below. The top board that houses 4 detectors and 4 LEDs unplug from the bottom board that has screw holes for mounting. The black plastic houseing is also optional and helps with shielding the detectors from ambient infrared. It is made of resin and can be painted if desired. Shown next to a Tamiya detector for comparison (below right). DO NOT paint the LEDs or detectors!