 Manifold orientation |
 Rear View |
 Clutch Plate removal |
 View of front housing |
 |
 Front housing removed |
 Front discharge reed valve |
 Front Valve Plate |
 Front shaft Plate & Seal |
 10mm socket & extension used to drive out Shaft Plate & Seal |
 Front 5 pistons |
 Important: Remove only one half at a time. otherwise pistons will fall off cam and reassembly will be very difficult. |
 Reinstall clutch plate shim. |
 Stand for compressor housing allows shaft to extend through hole in table. |
 Rear Suction Reed and Valve Plate |
|