Can Rolling Services

I offer rolling sevices only.
Please contact me with any questions you may have. Click here for an order form. To see the gallery of rolled cans, please click here.

Most recent:

Rolling Information:
Correctly sized sheets will be rolled with hook bends locking the seam together (inside of can). No glue or other binding material will be used. Sheets that are short may need to have seams inserted to bring the sheet to the correct size. Rolling is done by Dave Tanner - please contact Dave directly with rolling questions: 860-651-3825.

left: Two very nice Pabst cans;
Blatz can is a short sheet cone top

 

Type of Can to be rolled - Please contact me before sending sheets
Flat tops or pull tops: American 8 oz, 10 oz, 11 oz, 12 oz, 16 oz
Canadian 10 oz
12 oz cones
Short sheets - seam or tin addition to bring to correct length
Shipping information: 1-3 cans $5.50; 4-9 cans $7.50 plus insurance which is recommended. All cans are shipped with delivery confirmation.

Note: The sizing of flat sheets is very important. Correctly sized 8, 12, 16 or cone sheets should be 8 3/8 inches long but must be at least 8 5/16 inches long to be made into a rolled can without inserting a seam. Ten ounce cans need to be 7 25/32 inches long. Please see the sample pic to see a full sized sheet - notice the silver edge on the top and bottom of the sheet. This allows the can to be flanged and to then spin lids on it. For a full 12 oz sheet the height should be 4 7/8".

Lidding Services:
I don't offer lidding services. There are a couple of individuals who do this work very well. Please contact me with any questions.

ORDER FORM

At this time, I am not rolling 6 oz cones, 6 oz cans, 9 oz cans or quart cones