|
|
Daul TDS Meter
Dual Total Dissolved Solids Meter
The TDS meter is used to measure water
quality (The lower the TDS the purer the water). This meter is
installed to measure the feed water and output of the DI filter
unit. Initial readings were. Feed water measured 095 ppm of TDS
- Output measured 000 ppm of TDS. It was purchased from a vendor
on EBay.
FEATURES
-
Highly efficient and accurate due to its
advanced microprocessor technology.
-
Displays TDS levels of the Feed Water and
Product Water with in & out electrode probes.
-
Auto-Off function conserves battery power.
The unit shuts off automatically after 10 minutes of
non-use.
-
Dual Range - Measures from 0 ~ 999ppm, with
a resolution of 1ppm. From 1,000 to 9,990ppm, the resolution
is 10ppm, indicated by a blinking 'x10' image.
-
Factory Calibrated -Recalibration is not
necessary.
-
Comes equipped with John Guest Quick-Connect
T-fittings as shown.
-
Installs quickly and easily.
-
Three Year Limited Factory Warranty from HM
Digital
SPECIFICATIONS
-
Range: 0 ~ 9990ppm
-
Accuracy: ±2%
-
Power source: 2 x 1.5V button cell batteries
(included)
-
Battery life: over 1,000 hours of continuous
use
-
Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.)
-
Weight: 100 g (3.5 oz.)
|
 
|
|
