Drawer Guide Repairs

 

 

 

A close examination of the dresser case interior revealed four drawer guides needed to be replaced. I used oak stock to make the replacements and nailed them in place like the originals.

 

Below is a list of thumbnail photos. By clicking on a thumbnail you will see close up photos of some of the details in this project. Use the "Back" button on your browser to return to this page.

 

 

dresser_before4.jpg (16331 bytes) Inside close-up view of a couple of the guides. Guide "A" is broken on the end, and guide "B" shows what the end should look like.
drawer_repair2.jpg (26008 bytes) Only four of the guides had to be replaced. I made mine from oak. The old guides are on the right, new on the left.
drawer_repair1.jpg (25069 bytes) Here is a shot of half of the inside of the dresser case where three of the new guides were installed.

 

 

 

Return to main page Next page
 Main Next