Drawer Rails

 

 

 

The drawer rails divide the drawer compartments and connect the side panels in the front. They hold the sides together by means of dovetail joints cut into the side panels and the ends of the rails. 

Below is a list of thumbnail photos. By clicking on a thumbnail you will see close up photos of some of the details in this project. Use the "Back" button on your browser to return to this page.

 

 

 

Im70.jpg (27455 bytes) Feeding the walnut drawer rails into the planer.
Im72.jpg (25967 bytes) Cutting 3/4 inch dovetail slots in the side panels to receive the dovetailed tenons of the drawer rails.
Im73.jpg (29394 bytes) Drawer rails and upper chest side panels "dry assembled" to check for fit.

 

 

 

Return to main page Next page
 Main Next