Navigation    

 Home Page

 Interior Page

 Exterior Page

 Dodge Videos

 Awards Page

 Mods Page

 Stats Page

 vs. Competitor

 

 


 

2005 Dodge Ram 1500 Quad Cab 4x4

DAYTONA


Stats and Model Information

 

MODEL

Ram 1500 Daytona Quad Cab, Short Bed 4x4

POWERTRAIN

Layout longitudinal front engine/PT four-wheel drive

Engine 5.7 liter HEMI® V-8 engine, 2 valves per cylinder, OHV

Horsepower 345 @ 5400 rpm

Torque 375 lb-ft @ 4200 rpm

Transmission 5-speed automatic

Curb weight 4761 lbs.

Wheelbase 140.5 in.

Driveline Four Wheel Drive Part Time

Driveline (Opt) Four Wheel Drive Full Time

Steering Rack & Pinion

Steering Diameter Left 46.0

Steering Diameter Right 46.0

Suspension (Front) Independent

Suspension (Rear) Live

Length 227.7 in.

Width 79.5 in.

Height 74.0 in.

Bed length 6.3 ft.

Payload 1750 lbs.

Towing capacity 9300 lbs

Fuel consumption 12 / 18


EXTERIOR

Type 4-door

Passengers 6 passenger

Performance-style hood scoop

Body-color grille and tail lamp guards

Daytona wing spoiler

20-inch chrome-clad aluminum wheels

Chrome-tipped Borla® exhaust

Color: Go ManGo!

INTERIOR

Premium cloth seating in Dark Slate Gray

Instrument panel with body-color bezel accents

Sequentially numbered IP plaque #9005



My Window Sticker


Is it a true HEMI? TheHEMI.com says yes. Robert Lee, from Chrysler's Rear-Wheel Drive Engine department, stated the heads have true Hemi chambers with a few cubic centimeters of additional material on each side to channel the flow and get the proper burn characteristics. This was done in the chambers, instead of on the tops of the pistons, in order to maintain the engine's efficiency.

Press Release Published August 12, 2002

The 5.7-liter HEMI® Magnum V-8

Auburn Hills, Mich. -- While completely re-engineered from the legendary 426 HEMI V-8 that powered Chrysler muscle cars of the 1960s, two features earn the new 5.7-liter HEMI power plant its HEMI name.

  • The hemispherically shaped combustion chamber designed to accommodate large valves and put the spark plugs close to the center of the combustion chamber
  • The cross-flow valve arrangement that is perpendicular to the crankshaft Centerline

Facts and Features

  • The 5.7-liter HEMI® Magnum V-8 engine is an internally balanced pushrod (OHV) 90-degree V-8. The cast iron block is a deep skirt and cross-bolted design with cylinder bore spacing the same as the engine it replaces.
  • The aluminum cylinder features a two-valve per-cylinder, hemispherical combustion chamber with dual spark plugs and a coil over plug ignition for best-in-class airflow and power. At an impressive 345 hp and 375 lb.-ft of torque, the 5.7-liter HEMI cranks out 41 percent more power and 12 percent greater torque than the 5.9-liter Magnum V-8 it replaces. And the power plant is 56 pounds lighter than its predecessor.
  • An Integrated Air Fuel Module (IAFM) incorporates the function of 26 individual components in the induction and fuel system, thereby reducing cost, weight and engine plant complexity.
  • The 5.7-liter HEMI marks Chrysler Group’s first application of an electronic throttle control system in a rear-wheel-drive vehicle. The system uses a DC motor with reduction gears to open and close the throttle, for optimal control of the airflow into the engine.
  • A combination of the 5.7-liter HEMI and the new 545RFE five-speed automatic transmission will improve fuel efficiency for the heavy-duty pickup by 8-10 percent over the 5.9-liter V-8.
  • A systematic approach to sealing, using premium elastomeric materials and state-of-the-art practices, helps ensure a leak-free, weep-free engine.

The power plant’s simple and efficient design means servicing and repairs are easier and less costly.

Specifications

Type and description Eight cylinders, 90-degree V-type, liquid cooled
Displacement 354 cu. in (5,654 cu. cm)
Bore x stroke 3.92 x 3.58 (99.5 x 90.9)
Valve system Pushrod-operated overhead valves, 16 valves, hydraulic lifters with roller followers
Fuel injection Sequential, multi-port, electronic, returnless
Construction Deep-skirt cast iron block with cross-bolted main bearing caps. Aluminum alloy heads with hemispherical combustion chambers
Compression Ratio 9.6:1
Power (SAE net) 345 bhp (257 kW) @ 5400 rpm, (61.0 bhp/L), 2500 series
Torque (SAE Net) 375 lb.-ft (508) Nm) @ 4200 rpm 2500 series
Max. engine speed 5,800 rpm
Fuel requirement Unleaded mid-grade, 89 octane (R+M)/2 - recommended
Unleaded regular, 87 octane (R+M)/2 - acceptable
Oil capacity 7 qt. (6.6L)
Coolant capacity 18.7 qt. (17.7L)