Wrought Iron - Ellis Custom Knifeworks

Ellis Custom Knifeworks High temperature tools and refractory for forges, kilns, and heat treating applications
Home	Custom Cutlery	Custom Pens	Refractory & Knifemaking Supplies	About Us	Shop Tour	Contact Info	Links

Wrought iron anchor chain:

The stock is 1.5" diameter and each full link weighs approximately 8.5 pounds (+ or - 1/2 pound).

Each link will produce aproximately 19 inches of 1.5 inch diameter round stock.

This wrought iron is high grade, and is blacksmith quality, not architectural, which means that it is ready to be reworked into fittings or other parts without further refinement.

Prices:

Full link - $40.00

Half Link - $25.00

Wrought Iron FAQ

Wrought Iron - Full Link

Wrought Iron - Half Link

Wrought iron bar stock:

This stock is forged into flat bar from our anchor chain and is ready to use for guards and fittings. Generally the material runs oversize.

Current stock includes the following:

14.5" x 1.5" x 3/8" - $70

8.5" x 1.5" x 3/8" - $41 - SOLD!

9.5" x 1.375" x 3/8" - $42

11.25" x 2" x 3/8" - $72

10.5" x 1.5" x 5/16"- $42

14.5" x 1.75" x 5/16" - $68

14" x 1.5" x 5/16" - $56

12.5" x 1.5" x 5/16" - $50

Wrought Iron FAQ

14.5" x 1.5" x 3/8" - $70

9.5" x 1.375" x 3/8" - $42

11.25" x 2" x 3/8" - $72

10.5" x 1.5" x 5/16"- $42

14.5" x 1.75" x 5/16" - $68

14" x 1.5" x 5/16" - $56

12.5" x 1.5" x 5/16" - $50