 |
Track Construction
The master "router" for this track was WSSCA club member Phil Trattner. The track was cut and routed in pieces and then spliced together. We chicaned two of the turns and even routed a fancy "luf" type chicane to add some extra excitement! We constructed a special router guide to route the bank turn. (see below). It was made from 1/8th inch masonite and screwed into small 1 x 2 blocks which then were fastened to the track.
|
 |
 |
|
On to the Finished Track pictures Back to Father Bob's Home Page
|
 |