Parts
(click on photos for a larger view)
ALL SALES ARE FINAL
ALL PAYMENTS MUST BE MADE BY BANK CASHIERS CHECK OR PAYPAL.
EMAIL ME FOR PAYPAL PAYMENT DETAILS.
-
================================================
-
back to home page
2009 FREEWAY REUNION HATS
Here is your chance to own a piece of Freeway history.
These are the same hats that were being sold at the 2009 Reunion.
As you can see, the design has great detail.
Want One? Order one now before they are gone!
Price: $25.00 each
Status:
FOR SALE Reference#:2009HATSContact Info:
jim e.
E-mail:click here to send email
================================================
Custom Freeway Gas Tank
Custom made Freeway gas tank.
This smaller tank will make install very easy.
Photos here are of New Tank and Old Tank.
Size of these tanks are 18"L, 14"W, 5"D.
Has sender unit opening.
Has an added vent tube that original tanks did not have.
As these are custom built one at a time a pre-payment is required in advance and build/delivery time is 3 to 4 weeks.
Price: $195.00 each(includes shipping)
NEED IT SOONER? 1 WEEK DELIVERY! ...... $240.00 each(includes shipping)
Status:
FOR SALE Reference#:newtank001Contact Info:
jim
E-mail:click here to send email
================================================
Fuel Tank Sending Unit
This sending unit is a great replacement for the original unit with just a couple small mods by you results in a great unit for your Freeway tank.
This unit DOES have the correct OHM readings for the factory gauge.
Note: using a universal unit with incorrect ohm reading will cause inaccrate readings on your gauge.
The mods you will need to make are as follows:
(1) you need to shorten the the main support by 3 1/2 inches.
(2) you will need to shorten the float rod by 4 1/4 inches or use your original rod/float.
The photo here shows this new sender and a used original sender.
(photo of old sender is for comparison to new sender and is not included in the sale).
Price: $38.00 each(includes shipping)
Status:
SOLD OUT Reference#:sender001Contact Info:
jim
E-mail:click here to send email
================================================
Rear Brake Assembly - VERY RARE FIND
NOS (new old stock). Here is a rear brake assembly for most Freeways.
Before purchasing this unit please make sure it matches your
rear brake assembly.
These brake units include everything you see in the photo.
The only thing missing are the little clips/pins that hold the parking brake mechanism place, you can get them at local hardware store.
Take a close look at the photo, this unit has the brake cylinder, springs, star wheel adjuster, brake shoes, dust cover and parking brake mechanism.
note: there is some light surface rust on these from sitting around for years.
Some parts on this assembly have been obsolete for years!
If you could purchase parts separately your cost would be from $250.00
to $300.00, and that's if you could find the parts!
NOTE: I will not separate these units to sell individual parts.
Price:
$195.00 each(includes shipping)Status:
FOR SALE Reference#:rearbrake01Contact Info:
jim
E-mail:click here to send email
================================================
Rear Brake Dust Cover - A Rare Find
If you have the spider type rear brake and are like most
Freeway owners, your dust cover is cracked, part is missing
or just gone. This is an exact replacement dust cover.
Price: $37.50 each(includes shipping)
Status:
FOR SALE Reference#:dust01Contact Info:
jim
E-mail:click here to send email
================================================
REAR BRAKE TUNEUP KIT
These NEW parts are for the rear brake that uses the torque spider system.
As you see you get shoes and all springs/clips needed for rear brake.
Price: $65.00 (includes shipping)
Status:
FOR SALE Reference#:rearbrakekit01Contact Info:
jim
E-mail:click here to send email
================================================
Gas Filler Tube Body Grommet
This is the body grommet for the gas filler tube.
Price: $4.50 each(includes shipping)
Status:
FOR SALE Reference#:fillergromContact Info:
jim
E-mail:click here to send email
================================================
Gas Cap
Photo shows a RED original and a Replacement cap.
The top of the cap with vent hole is a bit different.
The underside has cork gasket and correct tabs.
These caps are not painted.
Caps are a perfect fit and a perfect replacement part for lost caps.
Price: $12.00 each(includes shipping)
Status:
FOR SALE Reference#:gascap01Contact Info:
jim
E-mail:click here to send email
================================================
Flex Rubber Brake Lines
Photo shows both lines, one 13" one 18".
Price listed here is for one line, your choice in length.
Make sure you use correct reference number listed below when ordering.
Price: $13.00 each line(includes shipping)
Status:
FOR SALE Reference#:flex13 or flex18Contact Info:
jim
E-mail:click here to send email
================================================
Front Side Window Snap Vents
Note: price is for a set of two.
Price: $28.00 (includes shipping)
Status:
FOR SALE Reference#:snapsContact Info:
jim
E-mail:click here to send email
================================================
Front Suspension Pillow Block Bearing and Collar
Photo shows one of these installed.
Sometimes referred to as a triangle bearing this is in fact a type of pillow block bearing. Note: price is for a set of two bearings and two collars.
Price: $27.50 (includes shipping)
Status:
FOR SALE Reference#:upperbearingContact Info:
jim
E-mail:click here to send email
================================================
HUBCAP SET
Photo is of one hubcap on my FREEWAY.
Note: price is for a set of two hubcaps.
Price: $40.00 (includes shipping)
Status:
SOLD OUT Reference#:HUBCAPSContact Info:
jim
E-mail:click here to send email
================================================
WeatherStripping KIT#1
Photos are a sample of the stripping that will be included in this kit.
This kit includes stripping and locking strip for windshield.
Also includes 50 feet (2 rolls of 25ft) of stripping for the body/frame.
Price: $195.00 (includes shipping)
Status:
SOLD OUT Reference#:KIT#1Contact Info:
jim
E-mail:click here to send email
================================================
IGNITION SWITCH
Another rare find .... IGNITION SWITCH.
This switch is an exact replacement for original switch
(note: it's a match for the switch in my 81, other switches may have been used
Screw type terminals (5) and all terminal markings match original switch.
note: color of housing may vary from the photo.
Price: $42.50 (includes shipping)
Status:
FOR SALE ... Very Limited Qty Reference#:igswitchContact Info:
jim
E-mail:click here to send email
================================================
AIR FILTER
This is a great replacement for the original air filter.
Price: $9.00 each (includes shipping)
Status:
For Sale Reference#:airfilter01Contact Info:
jim
E-mail:click here to send email
================================================
FRONT 2 INCH RUBBER SEAL
This is a perfect replacement for the original front seal
WARNING: This has a very sticky backing. You will have one shot to get it placed correctly.
I am selling this in 5 foot strips (this will allow you to cut two pieces for the front V bumper-to-body. Sorry I will not sell shorter or longer pieces.
Price: $15.00 (includes shipping)
Status:
BACK ORDERED Reference#:frontseal01Contact Info:
jim
E-mail:click here to send email
================================================
MIRRORS (set of 2)
NOTE: not a 100% match to original.
look at photo here, they extend out a bit more then the original.
Price: $35.00 (includes shipping)
Status:
FOR SALE Reference#:mirrors01Contact Info:
j. rostis
E-mail:click here to send email
================================================
BANDO DRIVE BELT (no photo)
This is a Bando drive belt.
Great belt for the Freeway. I have used Bando belts on snowmobiles.
Price: $53.50 (includes shipping)
Status:
FOR SALE Reference#:bandobelt01Contact Info:
j. rostis
E-mail:click here to send email
================================================
JASON DRIVE BELT (no photo)
This is a Jason 1926V belt.
I have been running this belt, as well as other freeway owners, now for a good while.
This is an industrial v-belt. gas,oil and heat resistant.
Price: $57.50 (includes shipping)
Status:
Available October 2009 Reference#:jasonbelt01Contact Info:
j. rostis
E-mail:click here to send email
================================================
GATES DRIVE BELT (no photo)
This is a GATES drive belt.
This is an industrial v-belt. gas,oil and heat resistant.
Price: $68.50 (includes shipping)
Status:
Available October 2009 Reference#:gatesbelt01Contact Info:
j. rostis
E-mail:click here to send email
================================================
COMET CLUTCH LUBE
Price: N/A
Status:
SOLD OUT Reference#:LUBE001Contact Info:
J. Rostis
E-mail:click here to send email
================================================
FREEWAY DRIVEN CLUTCH
New - Removed From Box For Photo
No Longer Manufactured
Price: N/A
Status:
SOLD OUT Reference#:PR4S001Contact Info:
J. Rostis
E-mail:click here to send email
================================================
FREEWAY DRIVER CLUTCH
New - Removed From Box For Photo
Price:N/A
Status:
SOLD OUT Reference#:PR4S001AContact Info:
J. Rostis
E-mail:click here to send email
================================================
REAR BRAKE SPRING SET
The Green & Red Rear Brake Springs
Paint is flaking a bit on these
"NEW" springs.
NOTE: some models do not have these springs
on rear brake assembly.
Price: $16.00/set (includes shipping)
Status: FOR SALE
Reference#:PR4S005
Contact Info:
J. Rostis
E-mail:click here to send email
================================================
Pillow Block Bearings
These are not aftermarket bearings.
This part is an exact replacement for bearings
used originally on the FREEWAY.
Some other bearings do not match original spec.
THESE MATCH 100%!.
Price: Price $80.00/set (set is 2 bearings/collars) (includes shipping)
Status: SOLD OUT
Reference#:PR4S023
Contact Info:
J. Rostis
E-mail:click here to send email
================================================
Driver Clutch Pucks
These are 53.5 gram pucks.
This weight puck is an exact replacement for original.
(the color has changed over the years ... these are black).
Most 94C FREEWAY clutches require a total of 6 pucks.
Price: $24.00/pkg (pkg contains 3 pucks)(includes shipping)
Status:
SOLD OUTReference#:PR4S021
Contact Info:
J. Rostis
E-mail:click here to send email
================================================
Driven Clutch Buttons
Price: $15.00/pkg (3 buttons per pkg) (includes shipping)
Status:
SOLD OUTReference#:PR4S022
Contact Info:
J. Rostis
E-mail:click here to send email
================================================
================================================
Complete Set of FREEWAY Running Lights
(no headlight included)
These are NEW lights and are an exact match to the lights (based on part numbers) that were used during production of the FREEWAY.
NOTE: Take a close look to make sure these lights fit your FREEWAY. Will fit most 81 and 82 models.
(click on photo to enlarge)
This set of lights includes the following:
One (1) License Plate Light.
Two (2) Round Tail light/Brake Light/Turn Signal.
Two (2) Rear Side Red Marker Lights.
Two (2) Front Side Amber Marker Lights.
Two (2) Front Amber Turn Signal.
A rare find for those of you that need replacement parts or are rebuilding or restoring a FREEWAY.
Sorry .... WILL NOT SEPERATE THE SET!
Status: FOR SALE
Price: $110.00 (includes shipping)
Reference#:PR4SLIGHTS
Contact Info:
J. Rostis
E-mail:click here to send email
================================================
FREEWAY Drive Chain
This chain was custom mfg. by a motorcycle chain company for me.
I spent a good number of hours/days looking for these and a company that would make them.
high impact solid rollers, high fatigue resistant link plates,
heat treated pins/bushings.
Status: For Sale
Price: $29.50 each (includes shipping)
Reference#:PR1CHAIN
Contact Info:
J. Rostis
E-mail:click here to send email
================================================