The hole is finally dug!

Another view

It's 11x11 feet wide

The concrete is poured

The base is "set" into the concrete

Everything done by Morrison Tower Comp.

The crane arrives!

The Tower in pieces

Up it goes in the air!

It's all set.

Looking good!

A view up the tower.

From inside

It's 5 feet on each side

A farther away view.

80 feet tall

The 40Mtr antenna

Rick, WC2K installing the Yagi

Making sure the bolts are secure

Rick climbing up!

Removing the pulley from the tower

Almost done!

Optibeam OB2-40 Mtr Yagi at 90 feet.

Optibeam 16-5 five-bander ready to be installed

Getting ready to hoist it up

Up she goes, straddling the tower

Getting close to the top

About 10 feet away from the top!

Just about there!

Now mounted, but awaiting other elements.

Rick, WC2K removing the top pulley.

Everything in place but a few elements

Finally done!

40Mtrs at 90 feet, 20 through 10Mtrs at 80 feet.

Nice look up the tower

You can see the inverted vees right below the lower Yagi.

All ready to use now!