General Disclamer

Plumbing Fixtures

Building Materials

MILLER DRAFTING SERVICE NOTES...
WHILE EVERY ATTEMPT HAS BEEN MADE IN THE PREPARATION OF THIS PLAN TO AVOID MISTAKES, MILLER DRAFTING SERVICE CANNOT GUARANTEE AGAINST HUMAN ERROR. THE CONTRACTOR AND OWNERS MUST CHECK ALL DIMENSIONS, DETAILS AND JOBSITE CONDITIONS AND BE RESPONSIBLE FOR THEM, WRITTEN DIMENSIONS ON THIS DRAWING TAKE PRECEDENCE OVER SCALED DIMENSIONS.

DESIGNER IS NOT AN ARCHITECT OR ENGINEER AND CONSTRUCTION FROM THESE PLANS SHOULD NOT BE UNDERTAKEN WITHOUT THE ASSISTANCE OF A CONSTRUCTION PROFESSIONAL. BECAUSE SITE CONDITIONS MAY VARY DESIGNER DOSE NOT WARRANT THE SUITABILITY OF THESE PLANS FOR USE ON YOUR SPECIFIC SITE. CONSULT A ARCHITECT AND OR CONTRACTOR TO DETERMINE THE SUITABILITY OF THESE PLANS FOR YOUR SPECIFIC SITE AND APPLICATION.

IT IS THE RESPONSIBILITY OF THE PURCHASER AND/OR BUILDER OF THIS PLAN TO SEE THAT THE STRUCTURE IS BUILT IN STRICT COMPLIANCE WITH ALL GOVERNING MUNICIPAL CODES (CITY, COUNTY, STATE AND FEDERAL).

THE PURCHASER OF AND/OR BUILDER OF THIS PLAN RELEASES, MILLER DRAFTING SERVICE, IT'S OFFICERS, OWNERS AND EMPLOYEES FROM ANY CLAIMS OR LAW SUITS THAT MAY ARISE DURING THE CONSTRUCTION OF THIS STRUCTURE OR ANYTIME THEREAFTER.

MINOR ALTERATIONS TO THIS PLAN CAN BE MADE BY BUILDER, IF MAJOR CHANGES ARE REQUIRED PLEASE CONTACT MILLER DRAFTING SERVICE FOR INFORMATION AND PRICE QUOTES.

GENERAL NOTES:

1. THESE PLANS WERE DESIGNED AND DRAFTED TO MEET THE AVERAGE CONDITIONS AND CODES IN THE STATE OF INDIANA. BECAUSE CODES AND REQUIREMENTS CAN CHANGE AND MAY VARY FROM JURISDICTION TO JURISDICTION, WE CANNOT WARRANT COMPLIANCE WITH ANY SPECIFIC CODE OR REGULATION. CONSULT YOUR LOCAL BUILDING PROFESSIONAL TO DETERMINE THE SUITABILITY OF THESE PLANS FOR YOUR SPECIFIC SITE AND APPLICATION.

2. THIS PLAN CAN BE ADAPTED TO LOCAL BUILDING CODES AND REQUIREMENTS, BUT ALSO, IT IS THE RESPONSIBILITY OF THE BUILDER OF THIS PLAN TO SEE THAT THE STRUCTURE IS BUILT IN STRICT COMPLIANCE WITH ALL GOVERNING MUNICIPAL CODES (CITY, COUNTY, STATE AND FEDERAL).

3. THE CONTRACTOR SHALL VERIFY ALL DIMENSIONS AND CONDITIONS AT THE JOB SITE BEFORE COMMENCEMENT OF WORK AND SHALL REPORT ALL DISCREPANCIES OR OMISSIONS TO THE OWNER IN WRITING.

4. DETAILS OF CONSTRUCTION NOT SPECIFICALLY SHOWN SHALL BE CONSTRUCTED IN ACCORDANCE WITH DETAILS SHOWN FOR SIMILAR CONDITIONS AND MATERIALS.

5. EACH SUBCONTRACTOR IS CONSIDERED AN EXPERT IN HIS RESPECTIVE FIELD AND SHALL PRIOR TO THE SUBMISSION OF BID OR PERFORMANCE OF WORK NOTIFY THE GENERAL CONTRACTOR OR OWNER IN WRITING OF ANY WORK CALLED OUT ON THE DRAWINGS IN HIS TRADE THAT CANNOT BE FULLY GUARANTEED.

6. THIS STRUCTURE IS DESIGNED AS A STABLE UNIT AFTER ALL COMPONENTS ARE IN PLACE. THE CONTRACTOR SHALL BE RESPONSIBLE TO PROVIDE TEMPORARY BRACING AS REQUIRED TO INSURE THE VERTICAL AND LATERAL STABILITY OF THE ENTIRE STRUCTURE OR ANY PORTION THEREOF DURING CONSTRUCTION.

7. WHENEVER REQUIRED, SHOP DRAWINGS, PRODUCT SAMPLE, PRODUCT SELECTION SHALL BE GIVEN TO THE OWNER FOR APPROVAL PRIOR TO THE PURCHASE OF THE ITEM.

8. THE ELECTRICAL LAYOUT IS SUGGESTED ONLY.

9. CONSULT A MECHANICAL, PLUMBING AND ELECTRICAL CONTRACTOR FOR FINAL LAYOUT OF ALL RESPECTIVE ITEMS TO MEET LOCAL CODE.

10. ALL STRUCTURAL MEMBERS ARE TO BE SIZED AND/OR CHECKED BY CONTRACTOR FOR COMPLIANCE OF LOCAL BUILDING CODES.

11. ALL PLUMBING, MECHANICAL, ELECTRICAL OR WINDOWS SPECIFIED MAY BE SUBSTITUTED WITH AN APPROVED EQUAL.