1. Print out the page that is displayed when you click on the link below. You may need to adjust the "page settings" in your web browser so that the two bumper stickers nearly fill a sheet of paper with the stickers oriented vertically.
2. Use a spray can to apply a thin uniform layer of weatherproofing (Krylon Acrilic Crystal Clear or similar product) to printed side of the paper.
3. Let dry for 60 minutes.
4. Depending on the type
of printer paper used and other factors, steps (2) and (3) may need to be
repeated several times to obtain a good seal.
5. Apply long strips of double-sided tape to the back side of the paper, placing tape underneath all four sides of the black boundary boxes.
6. Cut out your bumper stickers, cutting along the outside edge of the black boundary box.
7. Trim away any remaining small white areas lying outside the box.
8. Enjoy!