Installing a Richmond Controls Constant Intensity Light Package
in a Minitrix FM H12-44 in N Scale

Part 1 - Remove shell and test EZ26 constant intensity LED module

In August 2006, I commissioned Jim Hinds of Richmond Controls to build a constant intensity LED headlight package for installation in a N scale Minitrix Fairbanks-Morse H12-44 switcher.   Following is a step by step tutorial of the installation of this new EZ26 kit into the following switcher:


N scale Santa Fe 565 - Fairbanks Morse H12-44 Switcher (Phase IV)

Custom painted model by Randy Gustafson
Richmond Controls Constant Intensity LED Kit Installation by John Sing

Jim and I hope you enjoy your visit to this little web site!

John Sing                                        Jim Hinds
San Mateo, California, USA           Richmond, Texas, USA
singj@us.ibm.com                          sales@richmondcontrols.com                  

You're visitor number:
Most recent update: October 4, 2006
Copyright  2006 J. Sing, J. Hinds - All Rights Reserved

Table of contents:

Part 1:  Remove shell and test EZ26 constant intensity LED module  
Part 2:  Install EZ26 module 
Part 3:  Connect power to EZ26 module
Part 4:  Install rear LED and test; install front LED and test 
Part 5:  Tape wires to top of shell, replace shell, final test  

Part 1:  Remove shell and test EZ26 constant intensity LED module  










   Click here to go to Part 2:   Install EZ26 constant intensity LED headlight module
We hope you enjoy our tutorial.

John Sing and Jim Hinds
Click here to go to the Richmond Controls Home Page
Click here to return to John Sing's ATSF_Arizona Home Page

Please feel free to send comments to:  singj@us.ibm.com

Or to Jim Hinds and Richmond Controls:   sales@richmondcontrols.com
Guest Book: 


This webpage created by:

John Sing
San Mateo, California, USA

Modeling the Santa Fe's Peavine Line (Ash Fork -> Phoenix, Arizona)
in the 1950s and 60s - in N scale