Tools

	Powermatic Model 66 Table Saw I bought this saw to replace my Jet contractor saw. This will certainly be my last table saw.
	Jet 6" Closed-Base Jointer This baby was picked up for a cool $300 when Lowes was replacing stock with the Shop-Line series. It was the floor model for a year, so a little cleaning up was necessary. I've had to change the blades once so far. An experience I don't look forward to in the future. With the help on the Jointer Pal jig, it wasn't a complete nightmare. The jointer sits on a mobile base (Wood version) and is stored under my miter saw station when not in use.
	Jet 14" Closed-Base Bandsaw Although the bandsaw is one of the most versatile power tools, I use it primarily for resawing and some curve work. I use Suffolk Machinery's Timberwolf blades exclusively on this saw. The bandsaw sits on a mobile base (Wood version).
	Delta 31-250 18" x 36" Drum Sander I never thought I would buy a drum sander, but I found myself overwhelmingly inspired in the presence of Norm at Superior Tools in Indianapolis, IN when I went to meet him in person. I did ponder this purchase for quite a while before deciding to buy it. In a close second was the Powermatic 719A mortiser.
	Oneida 1.5hp Cyclone I sold my baby, a 1990 Arctic Cat Prowler sled, for this DC. I have it mounted to the wall in the corner of my shop. I upgraded to the 55 gallon drum, which is stored under the right extension wing of my miter saw station. I used all Oneida fittings and snap-lock duct for the branches. Almost all the machines are hooked up to the DC system, with a floor sweep in the middle of the shop. A Long Ranger remote operates the unit.
	DeWalt 12" SCMS It was the biggest, baddest saw: I had to have it! Rather than fight with a RAS, I opted for a SCMS. This saw tilts both ways and cross-cuts 12" at 90°. I built a station for it: 8' cross-cut capacity to the left, 4' to the right. I custom dust collection hood is in the works, as well as integrated fences and stop blocks. The saw sports a Forrest Chop-Master blade.
	DeWalt 12.5" Planer (The "Screamer") This was my first DeWalt tool. I bought it when I was doing scroll-sawing. I needed thin stock, so it was a must. Now I use it for every project. This planer had never given me any problems, except for the time it landed on my toe! It's a heavy sucker: 83 lbs! Blade changing is a breeze with the factory provided magnetic setting blocks. Snipe? What do you think?
	DeWalt 20" Scroll Saw I started my woodworking life doing scrollsawing, on a Dremel 16" 2-speed saw. When my needs exceeded the Dremel's capability, I bought this saw. The stand is a must for this saw. On a concrete floor, vibration is very minimal.
	Jointech Cabinetmaker's System I bought the Jointech Clincher system and top at a woodworking show, and then built the cabinet.
	Delta 12" Bench-top Drill Press A very nice drill press. Only on occasions have I needed something larger.
	Porter-Cable 3¼hp Router This work-horse is dedicated to router table use only. It features soft-start, ½" & ¼" collets, and variable speed. I try not to leave this router hanging in the table. At 18 lbs. this would eventually sag my phenolic plate.
	Porter-Cable 1½hp Router Kit My very first router(s). The fixed-base unit ran the router table until the Speedmatic came along. All handheld work is done with the 690 base. Only when I need to plunge to I throw the motor in the 693 base.
	Porter-Cable 19.2 Drill/Driver Before buying this I had a useless Skil 9.6 volt driver. Time and time again I found myself over at my neighbor's house borrowing his DeWalt 18 volt cause mine was too wimpy for the job. Well...never again. This drill is great!
	Porter-Cable 19.2 Hammer/Driver I bought this drill for the few masonry jobs I would encounter with the new house, but mainly I have used it as a secondary driver. I had one problem with it: trigger stuck and burned out the motor when sinking some lag bolts. The local Porter-Cable service center fixed it same day.
	Porter-Cable Cordless Tiger Saw This reciprocating saw has come in handy on a few decks (and demolition of my brother's shed) so far. The portability is nice, however you'll burn through batteries really quick using it.
	Porter-Cable 19.2 6" Saw Boss I procrastinated purchasing a circular saw for quite a while because I didn't think it was for woodworkers. Boy was I wrong! I bought this just prior to building the closet system for my office. Without it to cut down the 4' x 8' panels, I would have to resort to my jig saw. I use it mostly in combination with my Tru-Grip clamp.
	Porter-Cable Plate Joiner I bought this joiner for doing panel glue-ups and to reinforce miter joints. Although biscuits don't add strength to a edge joint, they're definitely helpful at aligning slightly cupped boards. I don't know what I would have done without this when gluing-up the lid on the cherry blanket chest!
	Porter-Cable 2" Brad Nailer This is my first pneumatic nailer. I use it only when necessary (one and probably only problem I have with Norm). Specs say it will accept ½" to 2" brads, but I have gone down to 5/8" without a problem. To date, the gun has not jammed once.
	Porter-Cable 1" Narrow Crown Stapler I bought this gun for the upholstery work on the poker tables, however I have found the staples to be too narrow. I'll keep it around for other tasks, though, like securing plywood backs to cabinets.
	Porter-Cable 5" ROS A true work-horse. No problems other than the pesky dust container. Oh well, that's why they make duct tape.