Half Crazy Carb Works (HCCW) SERVICES FOR SUZUKI INTRUDER 1500 LC ONLY
Proprieter: Larry Alvey
half_crazy@hotmail.com
Information
Services by Mail
***All prices below include parts, labor, and return shipping***
Re-jet Service
Includes: Float level set to 7mm, TPS adjusted to 76%, Static sync, New main jets, New pilot jets, Shimming of OEM needles, Mixture screws drilled and adjusted, and jetting sized specifically for your pipes, your altitude, and your choice of air filter (air filter not included)
. $ 105
Needlejet Rebuild Service
Includes: Replacement of the needlejets and installation of New OEM needles and E-clips -PLUS- Full re-jet service as described above
. $ 185
THE WHOLE 9 YARDS
Includes: New slides, and New diaphragms. (piston valve assy.) -PLUS- Replacement of the needlejets and installation of New OEM needles -PLUS- Full re-jet service as described above
$ 315
We will provide directions to remove and reinstall the carbs. Just package them up and head to the Post Office. If parts are in stock (usually are) I will turn your carbs around in 1 week. However, I have no control over "Backorder", so contact us early and we'll schedule your shipping to us around the parts delivery to minimize downtime for you. Like
"Your parts are here, go ahead and ship those carbs"
Longevity
Since the OEM needles are retained, we believe that using the HCCW method of re-jetting/rebuilding will allow your carbs to outlast the engine. What kills your needlejets is aftermarket needles.
If you experience any problems with our work we will make it right at no cost to you, period.
Price Comparison
Rejetting
A pre-packaged jet kit from Dynojet, Cobra, Vance & Hines, K&N, or Factory Pro will cost around $80 for a box of parts and directions. At HCCW you get re-jetting with GENUINE MIKUNI PARTS, a check that all systems are in factory spec, carbs synchronized, and your pipes, altitude and air filter are taken into account. Installation is performed by someone with LOTS of experience working on 1500 Intruders. All for $25 more than an aftermarket jet kit.
Needle jet replacement
Needle jet replacement is also offered by Factory Pro, and they have a PATENTED needle jet system for the 1500 Intruder. They will replace your needle-jets and install one of their jet kits for $285 plus shipping. At HCCW the rebuild/re-jet will cost $185 and return shipping is included.
Needle jet replacement kits are also offered by Motorcycle Carbs dot com. They cost like $189 and come with directions and tools to replace the needle jets yourself at home. We originally did the R&D for this kit and it works well and seems to be a permanent fix. You'll have to do the install/rebuild yourself and jets and OEM needles are NOT included.
At HCCW we will do the complete re-jet and the needlejet rebuild with new OEM needles for $185. we do all the work, and return shipping is included.
HCCW strongly recommends the "Whole 9 Yards" when rebuilding your needle jets. For an additional $130 you ensure best performance, mileage, and life span by replacing the slides and diaphragms.
If you have any questions feel free to contact me at half_crazy@hotmail.com
Related links