Nov 1 2002 - The aft mid skins have had the tabs bent over and re-fit to the skeleton.

Nov 3 2002 - The aft side skins have been fit and the alignment continues to look good. I guess I'm a little paranoid on the alignment after reading too many sites that say they ended up with a twist.

I finally got around to fitting the tailwheel weldment.

I fit the mid cabin bulkheads on both sides today as well.

Nov 5 2002 - I fabricated the aftmost floor bulkheads, primed, and riveted the parts tgether.

Nov 6 2002 - I fit the center bottom skins and the aft bottom skin today. no problems encountered though I did need help drilling some of the holes in the long skins since I couldn't hold alignment and drill at the same time.

Here are the fabricated rear seat belt anchors that mount to the side skins and aux longerons. They ahve already been fit to the fuselage and now just need primer.

<back home next>