Jul 14 2002 - Had a friend cut the spacers for the aileron bracket and aileron pushrods on a lathe.
| Jul 14 2002 - Had a friend cut the spacers for the aileron bracket and aileron pushrods on a lathe. | |||
| | | | |
 | Jul 15 2002 - Riveted the RH wing top inboard skin to the wing. We'll finish the top skins on this side later in the week. | |||
| | | | |
 | Jul 18 2002 - Finished riveting the RH top skins in place. Now on to fitting the aileron and flap. | |||
| | | | |
 | Jul 31 2002 - The LH flap hinge has been replaced. The gap was a little wider than called for and I wanted to get the hinge center in the middle of the gap. | |||
| | | | |
 | Jul 31 2002 - The RH aileron and flap have been fit to the wing along with the gap seal and flap brace. | |||
| | | | |
 | Jul 31 2002 - Both wings are now free of clecoes on the top side. Taking these pictures is a little hard, it's like photographing a mirror! Some final prep work and the bottom skins are ready for riveting. | |||
| | | | |
| | |