Empenage Engine Fuselage Wings

Home Photos Guestbook Links

Zen-Vair04.jpg (109072 bytes)

engine_dirty_web.jpg (129560 bytes)

engine_dirty2_web.jpg (81378 bytes)

oilpan off.jpg (85364 bytes)

topcover off.jpg (106364 bytes)

The ZenVair! Maybe one day my bird will look like this The beginnings of a good Corvaircraft engine; A useble core . . .(I hope).

Man this thing is ugly.

Oil pan off

Top cover off

rocker_cover_remove.jpg (76556 bytes)

Rockerarm_dirty.jpg (150430 bytes) vair_oneside.jpg (137701 bytes) corvair_head.jpg (77780 bytes) corvair_split.jpg (129106 bytes)
Removing the Rocker Covers Inside the Rocker Covers Left side off Left side head, pistons, and jugs. The case split open exposing the crank. This motor has been rebuilt before; bearings were 10 over.

corvair copy.jpg (67642 bytes)

mess.jpg (85140 bytes)

cut bellhousing.jpg (118845 bytes)

This is what I want my engine to look like. It belongs to Pat Panzera. 

A big Mess (Clyde, I promise I'll clean this up)

Rough cut bellhousing. For Front End Cover. The prop actually goes on the rear of the motor making it the front of the Aircraft conversion. 

 

Home /Engine /Empennage /Guestbook /Photos /Links /Fuselage /Worktable Construction /Advice for New Builders