What follows is a photo documentation of my fix of the power supply board in my Pioneer Elite 610 RPTV as described on AVS Forum.

For some photos, you can click for full size image.

Here is the back of the unit prior to removal of the back cover:

And here is pretty much the same shot after removal of the back cover. This shows the power supply board that needs to be removed and resoldered.

This is a closeup of the top of the board:

After removal, here is the underside of the board.

And finally, this shows a close-up of the most likely cause of the problem: the E3 connector. This was taken before resoldering.

If you prefer photos of dogs over circuit boards, you can go to my home page.