modification tutorials

links - forums/parts

recent projects & info

photo gallery







Door Panel

Warning: If you are not competent or do not feel comfortable doing any of these modifications or procedures, then please do not do so. I will not be held responsible for any damages caused by a result of your actions. Now on to the fun stuff!

I had a nasty rattling coming from the door panel whenever I hit a bump in the road. So, I removed the door panel to find the rear pocket had broken loose. The upper attachment strip may have also come loose, or may have been pulled off during the removal I'm not sure. The black plastic piece with 3 clips was also no longer attached in the center.

I sanded all the pieces to remove the old adhesive and cleaned with some acetone. Then roughed up the surface with a razor blade and some very course sandpaper. Then epoxied the pieces back in place one at a time and clamped them overnight to cure.

 

 


Questions? Comments? >> Email