Ken Mazer's B&O CPL Page

 This first series of pictures show the signal after I picked it up from the railroad. This was the Engle Westbound signal and was at Mile Post BA 84.7 I chose to have the mast sandblasted and restore a different signal head. The head was from the Hobbs signal at Mile Post BA 90.6

 These four photos are of one of the Light Assemblies. In the frist one it is completly removed from the signal head. In the second picture you'll notice that the outer lens ring has been removed. In the third picture the outer lens doublet has been removed to reviel the inner lens doublet(yellow). After this is removed you'll see a the bulb in this case it's a standard 1156 automotive bulb for 12 Volts.

 October 27th, 2003:  Here is a look at the front and back before I removed the light assemblies. Note I retained the orginal wires since they were in good condition.

 October 27th, 2003:  Here are four pictures of the signal head after I removed all of the light assemblies.

For a look at the Signal During the resotration process Click Here.