Highlights

 12/26/03 Bolt Kit Ordered
 2/09/03-02 Close up photo of back of maple neck
 2/11/04 Close up photo of BMF with Koa Headstock Overlay
 2/12/04-01 Close up photo of front of Koa body
 2/12/04-02 Close up photo of back of body
 2/14/04 Project Finally Started!!
 2/14/04-01 Neck Drying
 2/16/04 Sanding Sealer Application Complete
 2/20/04 Construction progress update.
 2/20/04 Here is a photo of the Koa body after raising the grain.
 2/21/04 Construction progress update.
 2/24/04 Bolt Plus Body and Neck
 2/24/04 Construction progress update
 2/29/04 Contruction progress update
 2/29/04 Koa Body after 9 coats of Oil & Urethane Top Coat
 3/09/04 Construction progress update
 3/28/04 Construction progress update
 3/28/04 Koa Body with hardware and electronics installed
 4/17/04 Consruction Complete
 4/18/04 Carvin Bolt Plus Kit; Koa Body, Birdseye Maple Fretboard
 7/5/04 New CT4M Ordered!!
 8/12/04 CT4M Arrives!!

MGE'S GUITARS

This site takes you through the building process of my Carvin Bolt+ kit as well as other info on my gear. This photo is of my two Carvin amps (AG100D and Bel Air 212) and my Epi Valve Jr; my Carvin LB20 Bass and B4 Bass (B4 from a kit),Carvin Bolt+ (kit); Atringer Custom Cat's Eye; Carvin CT4M; '63 Reissue ES-335; and my Carvin C980 and Takamine EAN40C acoustics. Details and info on my gear can be found under "Highlights" and "Photos".

You are visitor