For Sale Jaxports 1932 Ford Sedan RACE READY

         

          03/04 Suzuki gsxr 1000 (20 hours on engine)

          On board Fire Suppression system (bottle is good)

          Toyota 8 bolts rear end with 3:77 spooled gear.

          Suzuki tach with engine diagnostic port

          Mallory electric fuel pump and fuel filter (new cartridge)

          New Dyna Pro Power Commander III usb (with computer disk)

 

          ASKING $5000.00

 

          Rabco electronic 3500# scales  $650.00 

          3/4" x 29" sway bar (one increment more firm than stock) $100.00

          New in box (opended) Fluidyne 888 Oil cooler $150.00

          Geo radiator $35.00.

          Drivers suit, custom made by LEAF of Canada, black with red and yellow sleeve chevrons

          and yellow leg stripe. Worn once $200.00. ( I weighed 225, 48" chest, 42" waist, 6'-0" tall)

          Driving shoes, by LEAF, red, size 12. Worn 3 times. $75.00.

          4 - 1/4" wheel spacers $40.00.

          Call Larry Dolbee  786 973 8052

          email ldolbee@comcast.net

 

    

 

 

          For Sale Hubs and Rotors

         

          THE ROTOR IN THE UPPER LEFT (A) OF THIS PIC FITS REAR QUICK CHANGE HUBS

          107 MM BOLT CIRCLE, 9 3/4'' OD, .170 THICK AND THEY WEIGH 2lbs 6.5oz

 

          THE ROTOR IN THE RIGHT CORNER (B) FITS FRT. HUBS

          97MM BOLT CIRCLE, 9 7/8'' OD .243 THICK AND IT WEIGHS 3 lbs 9.1oz

          

          THE ROTOR ON THE BOTTOM MIDDLE (C) FITS FRT. ALUMINUM HUBS

          97 mm BOLT CIRCLE, 9 3/8'' OD, .243 THICK, AND WEIGHS 3lbs 3.3 oz.

 

          THESE ROTORS ARE ALL $50.00 EA. PLUS SHIPPING

          WE HAVE FOUND THAT WITH THESE ROTORS  DON'T PULSATE LIKE SCALLOPED ROTORS DO 

          GIVE ME A CALL WITH ANY QUESTIONS AT 1-260-833-2863 THANKS DICK @ RAPID RACE CARS

         

 

          PICTURES 100_2372, 100_2373 ARE FOR THE CHEVETTE HUBS (Aluminum)

          CHEVETTE HUBS ARE AVAILABLE IN 4 ON 4.5'' BOLT CIRCLE AND 4 ON 4'' BOLT CIRCLE. 

          HUBS COME WITH STUDS, WHEEL NUTS, BEARIN AND RACES, SEAL, CAP AND SCREWS.

          THEY WEIGH 3 lbs 8oz WITH STUDS AND RACES. 1 COMPLETE HUB KIT IS $165.00 PLUS SHIPPING
          ***BUY 2 HUBS AND 2 ROTORS $400.00 PLUS SHIPPING**

                    

          PICTURES 100_2374, 100_2375 ARE FOR THE TOYOTA HUBS  (Aluminum)

          TOYOTA HUBS ARE AVAILABLE IN 4 ON 4.5'' BOLT CIRCLE, HUBS COME WITH STUDS
          WHEEL NUTS, BEARINGS AND RACES, CAP ,SCREWS AND SEAL.
          THEY WEIGH 3lbs 3oz WITH THE STUDS AND THE RACES.
          1 COMPLETE HUB KIT  $165.00. GIVE ME A CALL IF YOU HAVE ANY QUESTIONS 1-260-833-2863
           **BUY 2 HUBS AND 2 ROTORS $400.00** PLUS SHIPPING

 

             

 

            GIVE ME A CALL WITH ANY QUESTIONS, THANKS, DICK @ RAPID RACE CARS 1-260-833-2863

 

 

          For Sale is a Jaxports Small Chassis Dwarf Car/Truck that is race ready.

         

           

         I have been running a limited schedule with the MCR Midwest Classic Racers for the past couple of years.

          This truck was a past MCR Champion- I was able to finish 3rd in point in only my second year of driving.

          Family and work are the reasons why I am selling. I cannot commit to running a full schedule.

          Itís either all or nothing.

         Strong running 2006 GSXR 1000, oil changed approximately every 200 laps

          Barnett Race clutch (has ten race weekends on it)

          Power commander

          Tuned ECU

          Kinsman air cleaner with velocity stacks

          Winters Quick Change rear end with five gear sets-(I love this, 5 minutes to change gears)

          Lightweight aluminum front hubs

          Wilwood calipers with light weight scalloped rotors (front&rear)

          Front/Rear brake bias adjustment

          Fire suppression system
          Pit Cart
 

          Extraís

          Cool suit system-w/ Long sleeve FR shirt
          Another set of Lightweight Aero race wheels (Black)
          Several radius rods, A-arms, wheel spacers and heims, etc..
          Spindles 2 right
          Wilwood caliper , pads and one scalloped rotor
          Pro shock, with springs
          extra rear bumper & side nerf bar
          Tire stagger tool (aluminum)
          Toe adjustment bar
          Portable air tank
          Longacre Air gauge
          Oil filters & oil

 

          Trailer
          14x7 Royal enclosed trailer w/ramp door
          Por15 coated floor and underbody
          Wired w/lights and outlets
          3500w generator
          12v 2000lb winch
          2gal air compressor with a retractable 25í hose reel
          Heavy duty metal file cabinet (for extra part storage)
          New spare tire and wheel
 
          This is a Turn Key operation.  Only a driver is needed.
 
          Will separate $11,000 for everything -- $8000 for the Truck

          Please call Todd Getz @ 517-304-8889 if you have any questions

           

        

         

         

 

 

 

 

          2008 Classic Racing Coupes Dwarf Car

          

          23 T convertible

          Louvered body with roof hatch

          Light weight front hubs and rotors with Wilwood calipers

          Pro coil over shocks

          Rack and pinion steering

          Side mounted radiator

          Kirkey seat

          Temp and oil pressure gauges

          Powder coated chassis and wheels

          Fuel pump in fuel cell

          2003 GSXR 1000 needs cases (see pictures)

          8 bolt Toyota rear with;

          3.30 with aluminum spool

          3.43 with aluminum spool

          3.73 locked

          3.90 locked

          4.10 locked

          $5750.00

          Contact Craig Meyers @

          734 699 7626 shop

          734 721 8339 cell

          Felix-78@sbcglobal.net

 

           

             

            

 

          Chevette style aluminum hubs

          

          Chevette style aluminum hubs with scalloped rotors, bolts, lugs, bearings, races and seals.

          $400 for the pair with everything plus shipping.

          These are half the weight of a Chevette hub and rotor.

          They are built with high grade aluminum and will not wear out like others on the market.

          These are set up for 4 on 4" and 4 on 4.5" bolt pattern.

          For more information or to order a set please contact us at jtinker00@comcast.net

   

         

 

 

                      Jon Wylie 517 861-0997           JAXPORTS PARTS       Office # (Will Post Soon)
        
          

PART #

DESCRIPTION

PRICE

BI-003

FORD GRILL SHELL

$75.00

BI-005

CHEVY GRILL SHELL

$75.00

BI-007

LEXAN WINDSHIELD BLANK

$60.00

CH-002

RIGHT NERF BAR

$95.00

CH-003

LEFT NERF BAR

$95.00

CH-004

FRONT BUMPER

$75.00

CH-005

REAR BUMPER

$90.00

DT-001

COMPLETE AXLE LONG OR SHORT

$390.00

DT-003

** 3:30 RING AND PINION NEW RICHMOND GEAR SET ONLY **

$100.00

MI-007

LIFT CART POWDER COATED

$210.00

RE-001

1/4" RH MALE ROD END

$5.00

RE-002

1/4" RH FEMALE ROD END

$5.00

RE-004

1/2" RH MALE ROD END

$8.95

RE-005

1/2" LH MALE ROD END

$9.25

RE-008

5/8 RH MALE ROD END

$17.00

RE-010

CLEVIS 5/8 RH X 3/8 HOLE X 3/16 SLOT

$17.00

RE-013

3/8 RH MALE ROD END

$5.75

RE-014

3/4 RH X 5/8 HOLE MALE ROD END

$29.00

RE-015

3/8 RH FEMALE ROD END

$6.25

ST-001

SWEET RACK 16.5:1 CENTER PULL 1/2 RH

$390.00

ST-002

SWEET CENTER PULL RACK END 1/2 RH

$48.00

SU-001

9" STEERING TIE ROD TUBE

$16.00

SU-002

6" STEERING TIE ROD TUBE

$16.00

SU-003

8" STEERING TIE ROD TUBE

$16.00

SU-004

MONO BALL

$22.00

SU-005

MONO BALL PIN CHEVETTE

$28.00

SU-008

LOWER CONTROL ARM 5/8"

$65.00

SU-009

TRAILING ARM REAR LOWER 1/2 RH X 1/2 LH 14" LONG

$17.00

SU-010

UPPER CONTROL ARM MONO BALL STYLE

$65.00

SU-011

UPPER CONTROL ARM COMPLETE ASSY

$135.00

SU-032

TRAILING ARM FRONT LOWER 5/8 RH X 1/2 LH 14" LONG

$17.00

SU-033

10"REAR UPPER LINK 1/2"RH X 1/2"LH

$16.00

SU-034

LOWER CONTROL ARM 5/8" COMPLETE

$90.00

** WHILE SUPPLY LAST **

MISC PARTS

(1)-MSD MC1 IGNITION BOX USED P/N 4210

$125.00

(2)-MSD MC2 IGNITION BOX USED P/N 4220

$175.00

(2)-MSD MC3 IGNITION BOX USED P/N 4223

$225.00

(2)-MSD MC2 IGNITION BOX NEW P/N 4220

$275.00

(2)-MSD MC3 IGNITION BOX NEW P/N 4223

$425.00

DIAMOND WHEELS ALL 4 X 4 1/2

(1)13 X 7 CHROME 3" OFFSET

$60.00

(1)13 X 7 CHROME 4" OFFSET

$60.00

(1) 13 X 7 SILVER POWDER COAT 2" OFFSET

$50.00

(1) 13 X 7 SILVER POWDER COAT 3" OFFSET

$50.00

(1) 13 X 7 SILVER POWDER COAT 4" OFFSET

$50.00

(1) 13 X 8 CHROME 2" OFFSET

$60.00

(1) 13 X 8 SILVER POWDER COAT 3" OFFSET

$50.00

(1) 13 X 8 SILVER POWDER COAT 4" OFFSET

$50.00

******** NEW ********

WINDOW NET KITS FOR NEW RULE FOR 2011 STARTING AT $50.00

PRICES AS OF 10/19/2010 SUBJECT TO CHANGE

 

 

              RACE CAR LETTERING
        
     Junior Gould Vinyl Graphics - Lettering Race Cars

              Trailers. Tow Vehicles, Signs & Banners with Premium vinyl's, 

              Available in just about any color.

              Logo Scanning as well as hundreds of different stripes
              & graphic combinations available.

              Have one of the best looking cars at the track !

              Contact: Junior Gould (517) 741-3731

 

NOTE: If drivers want a photo posted with their ads please send file with info.

 

 

 

MCR CHAMPIONSDWARF CARSDRIVERSSTATISTICSRACETRACKSRULEBOOK

2014 SCHEDULEPOINT STANDINGSCURRENT RACE RESULTSCLASSIFIEDSTECH QUESTIONSE-MAIL