For Sale Jaxports 1932 Ford Sedan RACE READY
03/04 Suzuki gsxr 1000 (20 hours on engine)
On board Fire Suppression system (bottle is good)
Toyota 8 bolts rear end with 3:77 spooled gear.
Suzuki tach with engine diagnostic port
Mallory electric fuel pump and fuel filter (new cartridge)
New Dyna Pro Power Commander III usb (with computer disk)
Rabco electronic 3500# scales $650.00
3/4" x 29" sway bar (one increment more firm than stock) $100.00
New in box (opended) Fluidyne 888 Oil cooler $150.00
Geo radiator $35.00.
Drivers suit, custom made by LEAF of Canada, black with red and yellow sleeve chevrons
and yellow leg stripe. Worn once $200.00. ( I weighed 225, 48" chest, 42" waist, 6'-0" tall)
Driving shoes, by LEAF, red, size 12. Worn 3 times. $75.00.
4 - 1/4" wheel spacers $40.00.
Call Larry Dolbee 786 973 8052
For Sale Hubs and Rotors
THE ROTOR IN THE UPPER LEFT (A) OF THIS PIC FITS REAR QUICK CHANGE HUBS
107 MM BOLT CIRCLE, 9 3/4'' OD, .170 THICK AND THEY WEIGH 2lbs 6.5oz
THE ROTOR IN THE RIGHT CORNER (B) FITS FRT. HUBS
97MM BOLT CIRCLE, 9 7/8'' OD .243 THICK AND IT WEIGHS 3 lbs 9.1oz
THE ROTOR ON THE BOTTOM MIDDLE (C) FITS FRT. ALUMINUM HUBS
97 mm BOLT CIRCLE, 9 3/8'' OD, .243 THICK, AND WEIGHS 3lbs 3.3 oz.
THESE ROTORS ARE ALL $50.00 EA. PLUS SHIPPING
WE HAVE FOUND THAT WITH THESE ROTORS DON'T PULSATE LIKE SCALLOPED ROTORS DO
GIVE ME A CALL WITH ANY QUESTIONS AT 1-260-833-2863 THANKS DICK @ RAPID RACE CARS
PICTURES 100_2372, 100_2373 ARE FOR THE CHEVETTE HUBS (Aluminum)
CHEVETTE HUBS ARE AVAILABLE IN 4 ON 4.5'' BOLT CIRCLE AND 4 ON 4'' BOLT CIRCLE.
HUBS COME WITH STUDS, WHEEL NUTS, BEARIN AND RACES, SEAL, CAP AND SCREWS.
THEY WEIGH 3 lbs 8oz WITH STUDS AND RACES. 1 COMPLETE HUB KIT IS $165.00 PLUS SHIPPING
***BUY 2 HUBS AND 2 ROTORS $400.00 PLUS SHIPPING**
PICTURES 100_2374, 100_2375 ARE FOR THE TOYOTA HUBS (Aluminum)
TOYOTA HUBS ARE AVAILABLE IN 4 ON 4.5'' BOLT CIRCLE, HUBS COME WITH STUDS
WHEEL NUTS, BEARINGS AND RACES, CAP ,SCREWS AND SEAL.
THEY WEIGH 3lbs 3oz WITH THE STUDS AND THE RACES.
1 COMPLETE HUB KIT $165.00. GIVE ME A CALL IF YOU HAVE ANY QUESTIONS 1-260-833-2863
**BUY 2 HUBS AND 2 ROTORS $400.00** PLUS SHIPPING
GIVE ME A CALL WITH ANY QUESTIONS, THANKS, DICK @ RAPID RACE CARS 1-260-833-2863
For Sale is a Jaxports Small Chassis Dwarf Car/Truck that is race ready.
I have been running a limited schedule with the MCR Midwest Classic Racers for the past couple of years.
This truck was a past MCR Champion- I was able to finish 3rd in point in only my second year of driving.
Family and work are the reasons why I am selling. I cannot commit to running a full schedule.
Itís either all or nothing.
Strong running 2006 GSXR 1000, oil changed approximately every 200 laps
Barnett Race clutch (has ten race weekends on it)
Kinsman air cleaner with velocity stacks
Winters Quick Change rear end with five gear sets-(I love this, 5 minutes to change gears)
Lightweight aluminum front hubs
Wilwood calipers with light weight scalloped rotors (front&rear)
Front/Rear brake bias adjustment
Fire suppression system
Cool suit system-w/ Long sleeve FR shirt
Another set of Lightweight Aero race wheels (Black)
Several radius rods, A-arms, wheel spacers and heims, etc..
Spindles 2 right
Wilwood caliper , pads and one scalloped rotor
Pro shock, with springs
extra rear bumper & side nerf bar
Tire stagger tool (aluminum)
Toe adjustment bar
Portable air tank
Longacre Air gauge
Oil filters & oil
14x7 Royal enclosed trailer w/ramp door
Por15 coated floor and underbody
Wired w/lights and outlets
12v 2000lb winch
2gal air compressor with a retractable 25í hose reel
Heavy duty metal file cabinet (for extra part storage)
New spare tire and wheel
This is a Turn Key operation. Only a driver is needed.
Will separate $11,000 for everything -- $8000 for the Truck
Please call Todd Getz @ 517-304-8889 if you have any questions
2008 Classic Racing Coupes Dwarf Car
23 T convertible
Louvered body with roof hatch
Light weight front hubs and rotors with Wilwood calipers
Pro coil over shocks
Rack and pinion steering
Side mounted radiator
Temp and oil pressure gauges
Powder coated chassis and wheels
Fuel pump in fuel cell
2003 GSXR 1000 needs cases (see pictures)
8 bolt Toyota rear with;
3.30 with aluminum spool
3.43 with aluminum spool
Contact Craig Meyers @
734 699 7626 shop
734 721 8339 cell
Chevette style aluminum hubs
Chevette style aluminum hubs with scalloped rotors, bolts, lugs, bearings, races and seals.
$400 for the pair with everything plus shipping.
These are half the weight of a Chevette hub and rotor.
They are built with high grade aluminum and will not wear out like others on the market.
These are set up for 4 on 4" and 4 on 4.5" bolt pattern.
For more information or to order a set please contact us at firstname.lastname@example.org
517 861-0997 JAXPORTS PARTS Office
# (Will Post Soon)
Trailers. Tow Vehicles, Signs & Banners with Premium vinyl's,
Available in just about any color.
Logo Scanning as well as
hundreds of different stripes
Have one of the best looking cars at the track !
Contact: Junior Gould (517) 741-3731
NOTE: If drivers want a photo posted with their ads please send file with info.