Base 3 - what the scope chassis looks like when you strip off the covers and mother board.

Base 2 - Shows area under motherboard.

Base 1 - show az gear and bearings atop which N5 rides.

Motherboard 1 - The whole motherboard.

Motherboard 2 - Shows the main EPROM chips (e.g. this is a 2.x.y.z version scope).

Motherboard 3 - Shows the revision of the motherboard itself. 

Motherboard 4 - shows the version 12 Azm and Alt microcontrollers (e.g. its a 2.12.12.z scope).

Motherboard 5 - I think the focus here is on the square microprocessor in the lower center-left.

Motherboard 6 - I believe the focus here is on these chips which are adjacent to the Alt and Azm chips.

Motherboard 7 - A real closeup of the microprocessor.

Motherboard 8 - Another view of the EPROMs and microprocessor.

Hand Controller 2 - The inside of the hand controller showing the microcontroller.

Hand Controller 1 - A view of the version 6 microcontroller in the hand controller (e.g. it is a 2.12.12.6 scope).

Hand Controller 3 - Detail showing where the wires from the base connect in.

Hand Controller 4 - backside of the circuit board showing where the wires from the base connect in.

February 16, 2002