Last Metar Refresh: Original Metars
Recent Observations (METARS) last checked Friday, Feb 27, 2015 at 3:40AM PST

Aviation Digital Data Service (ADDS)

Output produced by METARs form (3:40 AM PST
Conditions at: CWZA (AGASSIZ (AUTO) , BC, CA) observed 3:00 AM PST
Temperature: 5.9°C (43°F)
Dewpoint: 4.6°C (40°F) [RH = 91%]
Winds: from the E (100 degrees) at 2 MPH (2 knots; 1.0 m/s)

Conditions at: CYXX (ABBOTSFORD AIRPO, BC, CA) observed 3:00 AM PST
Temperature: 6.0°C (43°F)
Dewpoint: 4.0°C (39°F) [RH = 87%]
Pressure (altimeter): 29.80 inches Hg (2:09 AM PST.2 mb)
[Sea-level pressure: 1009.2 mb]
Winds: from the N (360 degrees) at 3 MPH (3 knots; 1.6 m/s)
Visibility: 15 miles (24 km)
Ceiling: 8,000 feet AGL
Clouds: overcast cloud deck at 8,000 feet AGL
Weather: no significant weather observed at this time

Conditions at: KBLI (BELLINGHAM , WA, US) observed 2:53 AM PST
Temperature: 6.7°C (44°F)
Dewpoint: 5.0°C (41°F) [RH = 89%]
Pressure (altimeter): 29.79 inches Hg (2:08 AM PST.9 mb)
[Sea-level pressure: 1009.5 mb]
Winds: calm
Visibility: 10 or more miles (16+ km)
Ceiling: 6,000 feet AGL
Clouds: overcast cloud deck at 6,000 feet AGL
Weather: -RA  (light rain)

Conditions at: KBVS (BURLINGTON/MT V , WA, US) observed 3:35 AM PST
Temperature: 7.0°C (45°F)
Dewpoint: 7.0°C (45°F) [RH = 100%]
Pressure (altimeter): 29.79 inches Hg (2:08 AM PST.9 mb)
Winds: from the NE (50 degrees) at 6 MPH (5 knots; 2.6 m/s)
Visibility: 10 or more miles (16+ km)
Ceiling: 3,600 feet AGL
Clouds: few clouds at 2,700 feet AGL
broken clouds at 3,600 feet AGL
overcast cloud deck at 4,500 feet AGL

Conditions at: KNUW (WHIDBEY IS. NAS , WA, US) observed 2:56 AM PST
Temperature: 8.9°C (48°F)
Dewpoint: 6.7°C (44°F) [RH = 86%]
Pressure (altimeter): 29.78 inches Hg (2:08 AM PST.5 mb)
[Sea-level pressure: 1008.8 mb]
Winds: from the E (80 degrees) at 7 MPH (6 knots; 3.1 m/s)
Visibility: 8 miles (13 km)
Ceiling: 4,300 feet AGL
Clouds: few clouds at 1,200 feet AGL
scattered clouds at 2,500 feet AGL
overcast cloud deck at 4,300 feet AGL
Weather: RA  (rain)
SOME DATA ABOVE MAY BE INACCURATE!!!
"$" is an indication the sensor requires maintenance