WealdLake
a Canton of the Barony of North Woods

Click here for map

by Banded Tree™

This page contains links that connect to sites over which neither the SCA or The Canton of Wealdlake has any control. It also contains pictures, which may take time to load depending on your and my upload/download link speeds.

As well as cooking and food, of which I cannot seem to do without, I also like to work with wood. I am learning to make furniture pieces in the medieval style, using both modern and period methods.

The biggest challenge is to make a piece of furniture that both looks "period" as well as breaks down for transport to events. Events are either day events held at a school, church or a park, or multi day events held at a camping area. (click here for our canton calendar of events). The "RV" of the period was the wagon carrying your tent, furniture, supplies and yourself. What you brought depended on the distance you needed to travel, length of the stay once you arrived, and the space in the wagon or wagons. Additional "vehicles" (wagons, carriages, horses, mules, ponies, etc.) for people transport was helpful and appreciated, but there was always your two feet - even for long trips.

This is not so different from today and what we can fit in the car, van, truck, SUV or attached trailer. This is where the breaking down part comes in handy. The larger pieces I have made are pegged together. However, not everything should break down to pack. The supply boxes must be sturdy and not come apart or the stuff inside will be destroyed. The furniture must be able to handle the extremes of weather one encounters camping.  Here are some links to wood working sites as well as pictures of pieces made by myself - Banded Tree™ banded tree furniture 018.jpg (205391 bytes)

I am indebted to my family for putting up with the mess outside as I work on these projects, and for their assistance in producing the artwork on the pieces.  I craft a piece and sand it ready for decorating.  My wife or daughter then decorates it with wood burning or ink art to add the finishing touches (see the wolves burned into the Ironwolf table, chair arms and backs, the boxes, etc.)  The piece is then stained and protected with a "poly" finish.  The Banded Tree™ logo, designed by my wife and daughters and made into a brand for me , gets put on each piece that has passed their rigorous quality standards.  It is not Banded Tree™until they give the okay.

An X-chair takes around 32 hours, not counting drying time for poly, to make by hand. The benches of walnut and oak, 8 hours each, the cottage table, 12 hours, the castle table, 12 hours - all not including drying times for stain and poly, or about a week per piece with drying overnight between coats. The small boxes take an hour to cut and assemble, the designs can take over an hour to put on. These are not quick projects when using medieval methods, so all Banded Tree™ items are 'gifted' (although some are commissioned for 'gifting' to the person commissioning the project.) However, a project may be commissioned only if the artisans of Banded Tree™ are willing to take on the project. There have been a few items made for sale at the Medieval Village, per request of the guests of the village. These vary in kind and are limited in production. The latest were the gaming tables shown below. For those willing to take on the challenge, the reference links and books are included below so you too can build your own "medieval" furniture.

Note: Polyurethane is not a period finish. However, I use outdoor marine grade polyurethane as it keeps the pieces looking good with a minimum of upkeep over years of use. These pieces are expected to handle extremes of temperature as experienced in the hills of Pennsylvania or the summers of Michigan, as well as the abuse of travel, while being expected to look their best when set up at the final destination. Durability is a requirement today, just as it was in the Middle Ages.


Here are examples of my work to date:

WARNING: To the best of my knowledge, this is not a period design. This design is for groups or individuals to use to make a portable, easy to store, easy to make, easy to modify, inexpensive set of tables or benches.

I have been asked to make a storable, portable, durable table for different groups. As you can see by the animated picture, this table can be made very quickly - in 47 seconds with camera magic! It really takes about 90 minutes to make 4 - 2"W by 4"L tables. This is a quick and dirty design using power tools, a sheet of plywood, nuts and bolts and some 2"x4"s. Click here for the picture by picture instructions.


Period work follows:


bench_1.jpg (27970 bytes) banded tree furniture 014.jpg (201569 bytes) A couple of my walnut and oak benches. These are from "rough cut" walnut with "rough cut" oak crossbeams. The holes for the mortise and tendon joints were cut out by hand with chisels. The cuts were with hand saws. The tops were hand planed.

The attempt was to make furniture of a type made by the local woodworkers for the daily use by the villagers/peasants, using medieval methods, with tools that although of modern manufacture, are the same designs traced back to biblical times. This furniture would not necessarily be of the nobles personal furnishings, but might well be used by the servants in their areas, the villains in their cottages, etc. In other words, these are the daily use, practical pieces, not the showcase masterworks you would see in the museums. These are all of break apart designs so they will travel for camping, as well as from house to house. A noble might have several estates, but as you see by the time it takes to make these "simple" furniture pieces, they often had only one set of household furnishings due to the expense.


banded tree furniture 009.jpg (226862 bytes) A folding or X-chair I made for my wife, Lady Aliyah. The X-chair or camp chair can be traced back to Roman times, but without the back support piece on this chair. The best example of an old Roman camp chair is the folding camp chair you can pick up in the camp supplies areas of department stores and sporting goods stores. They are made of wood or metal with the canvas sling top for you to sit on. The chairs were made with many variations throughout the middle ages, with this variation showing up in the 1100s.

banded tree furniture 013.jpg (170750 bytes) The footstool I made for my wife of walnut. It is basically a smaller version of a bench.

Aliyah bed 002.jpg (112618 bytes) Aliyah bed 003.jpg (219842 bytes) Aliyah bed 005.jpg (31258 bytes) Aliyah bed 001.jpg (166055 bytes) Aliyah bed 004.jpg (198359 bytes)

For those familiar with the story of Aliyah and Áindle, this is the bed I made as a result of our marriage (see pictures in our album.) The rope is not medieval, but a cotton poly rope that will not rot or mildew as this is used for camping. A few interesting parts of this bed are from discussion I had at a Balloonfest demo. There was a man making Viking rope beds opposite me. So, the small legs are notched and between the rope boards. The tall legs are also between the rope boards. This is because the tension of the rope will hold the bed together, so there is no need to peg the legs. The ropes are held tight by small pieces of wood with three holes. Aliyah made sure she put her rose on the headboard to show it was her bed. She did concede and put a banded tree for me on the footboard. Yes, the artwork is by Aliyah.


baby_box.jpg (32802 bytes) baby_box_2.jpg (37752 bytes)

A "baby box" I made for a friend in 2006, based on designs going back to Roman times. One feature of this design is the ability to rock the cradle with one foot without fear of tipping, as the wide rocker bars only allow a tip of 2 inches. It was a surprise to see WOOD magazine, Issue 178, September 2007 had a similar cradle on their cover with an article on the Heirloom Cradle . It is a good representation of this timeless classic, and has the added benefits of a break down design, a case for storage, with full size plans of the rockers so you do not have to devise the curve yourself, as did I.


banded tree furniture 022.jpg (154668 bytes) banded tree furniture 008.jpg (190156 bytes)

The cottage table I made with oak legs and framing, with a natural walnut top. This also is pegged together so it breaks down for travel. My wife named it a cottage table as it is a 4 foot by 3 foot tabletop - just what you would have in the cottage kitchen.


banded tree furniture 015.jpg (252561 bytes)

The folding or X-chair I made from oak for myself. The duck is from my personal cognizance or heraldic device. These embellishments were put on by my wife and daughter.


ironwolf_table__002.jpg (31116 bytes) ironwolf_table_1.jpg (31050 bytes)

A castle table I made for the Household of the Company of Ironwolf from dimensional pine purchased from the lumberyard. This is proof you can produce furniture that will look "medieval" without having to get "rough cut" wood. The artwork is the Company of Ironwolf device, recreated here by with the artistry of my wife and daughter. This was named the castle table by my wife as it is 6 foot by 3 foot - what you might find in the main hall or at least in the castle kitchen.


sue_chair_and_milord_bench_008.jpg (88194 bytes)

An X-chair with the accompanying milord's bench made for a friend. (The milord's bench is designed so that her husband can sit at her feet and gaze lovingly and adoring at his most gracious Lady.) Again, the artwork is designed and burned into the wood by my wife and daughters for our friend.


Odelyah bed 002.jpg (85637 bytes) Odelyah bed 001.jpg (122176 bytes) Odelyah bed 003.jpg (74558 bytes)

Here is the bed my friend commissioned. This was a bed for her, so it has the matching artwork to her chair and bench. This bed is a pegged platform bed. Instead of several boards from headboard to footboard, she requested a few boards so there would be less to lose. Plywood is used for the platform base. The bed is all pine for light weight. The artwork was by my wife.


bower_full.jpg (60174 bytes)

A picture of part of the outdoor furniture set I made for my wife as her anniversary present - the cottage table, two of the three walnut benches, the 2 X-chairs with the footstool.  (The wood in the foreground is for the rope bedframe for our wedding bed -pictures above.)


steve box 001.jpg (868378 bytes) boxes 2008a web.jpg (43596 bytes) boxes 2008b web.jpg (22621 bytes)

Here are some pictures of small boxes I have made. The first is the box for my wedding to Aliyah on June 24, 1281 (as reckoned by the SCA)  at the Medieval Village Demonstration put on by the Canton of Wealdlake for the Michigan Challenge Balloonfest in Howell, MI. The design is an original made by my daughters for their parents wedding (see the Medieval Wedding website for details).  The lining is by my wife. The second was for the boyfriend (later husband) of one of my four daughters. These are examples of the over 30 different designs my wife and daughters have made for the boxes.


boxes 007.jpg (576860 bytes) boxes 016.jpg (670440 bytes)

The Minister of Youth  for our Canton (my daughter and now the Pentamere Minister of Youth) needed a donation box. She came to Banded Tree™ and commissioned a box. This has the sliding lid so if the box is knocked over - everything does not fall out. The design incorporates the Minister's personal cognizance.  The design and wording all are by my wife and daughters.


boxes 009.jpg (845118 bytes) boxes 011.jpg (900970 bytes) boxes 012.jpg (1111021 bytes)

My daughter got a wooden flute - but how to keep it safe? She also needed a way to keep her music standing up -so a box with a lid that works as a music stand was made by Banded Tree™. The lining was made by my wife to fit the flute. The lid design looks familiar...


100_0313.JPG (755784 bytes) 100_0314.JPG (748192 bytes)

Here is Morgan Endstar, a fellow member of House Ironwolf. He is a merchant ship captain who is a purveyor of "pre-stolen" goods. In addition, he makes cordials based primarily on rum. To showcase his latest creation, I made a special box designed to hold the precious fluid. It has a sliding lid that stores in the back when the bottle is displayed.  It also has a clear Plexiglas pane (yes, not medieval, but glass breaks too easily and safety first) that also slides to keep hands from removing the bottle until Morgan decides to allow the bottle to be sampled. It has been able to keep his "prizes" intact through many pitched "supply acquisition encounters" as well as how them off on his mantel (or so his stories relate.) It has his initials burned in by my Lady.


wooden benches 002.jpg (880074 bytes) wooden benches 006.jpg (850927 bytes) wooden benches 012.jpg (995018 bytes) wooden benches 014.jpg (868594 bytes) wooden benches 021.jpg (859483 bytes)

Benches come in different styles - and I have 4 daughters. As you can see here, I make benches in different styles and sizes (4 of a size that can be sat on by daughters.) The 3rd picture is a very small bench, the 4th picture shows its size in comparison to a pair of cat's paws (beware the Imp), and the last is a grouping of the different benches on this page to give a idea of relative sizes.


weldlake table web.jpg (26802 bytes) brown gaming table side view web.jpg (54511 bytes) purple gaming table web.jpg (43645 bytes) brown gaming table web.jpg (55438 bytes) northwoods table web.jpg (106333 bytes)

The latest addition to my woodworking are the gaming tables. These are tiled by my wife and daughters. The last two are tables for the Barony with its device and our canton with its device.


100_0740.JPG (1257684 bytes) 100_0741.JPG (984944 bytes)

Here is a box for a scribe. The top was done as an illumination scroll by my wife for Lady Thea de Nes as a thank you for her support of It Takes My Child To Raze A Village by providing Illuminated awards for each event winners.


IMGP0579.JPG (1616823 bytes) IMGP0574.JPG (1380432 bytes) IMGP0571.JPG (1610419 bytes) IMGP0578.JPG (1583993 bytes)

Sometimes you need a box to carry items...and if it just happens to also hold an insert that is insulated, so much the better!


Where do I do the work? I work outside when it is warm. Here is the work table I made for myself and some of the tools I used to make many of the items you see above:


Artisans of Banded Tree™:

Lady Alianor bat Asriel (aka Aliyah) - Quality Control, Project Designer, Embellishment Designer, Woodburning, Ink and Paint Embellishment

lady Rachel of Wealdlake -Embellishment Designer. Woodburning, Ink Embellishment

lord Steven of Wealdlake- Apprentice, son-in-law, (husband of Rachel)

Lady Sæhildr barngóðr- Embellishment Designer, Apprentice

Lady Bryn Archer - Embellishment Designer, Apprentice

lady Sarah of Wealdlake - Embellishment designer

lord Jonathan of Wealdlake - Apprentice, son-in-law, (husband of Sarah)

Áindle ÓDiarmada -carpenter, project designer

(Yes, it is a family enterprise.)



Project Resource Books used by me (good for techniques, plans) :

The Woodwrights Apprentice, Roy Underhill, The University of North Carolina Press, ©1996.

Constructing Medieval Furniture, Daniel Diehl, Stackpole Books, ©1997.

Medieval Furniture, Daniel Diehl and Mark Donnelly, Stackpole Books, ©1999.