.45GAP: Hodgdon Titegroup Powder

Disclaimer: The powder charge information (in black) was taken from gun powder companies, gun powder distributors, and/or published handloading data (paper and/or electronic) to the best of my knowledge – not responsible for typos; Always refer to published official handloading data for verification.

Pressures may differ significantly due to component variations and whether a test barrel or an actual pistol was used for testing purposes. I am not responsible for your actions. Powder charges that are too light or too heavy can both cause pressure problems. Use your own common sense. If you wish to use any of the following data, use at your own risk! You are responsible for your own actions.

WARNING: Red lettered data in charts refers to loads that have not been officially pressure checked and may be beyond maximum pressure limits --- extreme caution required.

Glock 37 with standard 4.5” barrel

Speer brass

Winchester small pistol primers

West Coast plated 200 grain Flat Points.

OAL: 1.075

Grains

High Velocity

Low Velocity

Extreme Spread

Average Velocity

Standard Deviation

Energy Avg

Power Factor

Comments

4.2

724

699

24

712

8

225

142

USPSA Minor Power

4.4

782

743

39

765

12

259

153


4.6

832

791

40

809

12

290

161




Glock 37 with standard 4.5” barrel

Speer brass

Winchester small pistol primers

West Coast plated 185 grain Flat Points.

OAL: 1.060

Grains

High Velocity

Low Velocity

Extreme Spread

Average Velocity

Standard Deviation

Energy Avg

Power Factor

Comments

4.3

740

684

56

719

19

212

133

USPSA Minor Power

4.5

800

755

45

775

15

246

143


4.7

846

791

55

814

18

272

150


4.9

862

823

39

847

13

294

156




safety, safety, safety

Disclaimer/Safety Warning

.45GAP (.45 GAP) Caliber Page; Document Version 06/26/04