In 2003, The Pine Hollow Airport Association, LLC worked with Wasco County Planning to implement standards for hangar construction at Pine Hollow. This was achieved through an overlay zone covering the Pine Hollow Airstrip Subdivision.
Immediately after the overlay zone became law, construction began on two hangars. A third hangar will be constructed in September, 2004. Several hangars were already built under variances. Hangar construction is now a standardized process.		Aircraft Hangars subject to the following standards: a. Property owner(s) must provide evidence of legal use of the Pine Hollow  Airport from the Pine Hollow Airport Association, LLC, or any future entity  owning the Pine Hollow Airport. b. Property owner(s) must present "Wet Stamped" engineered drawings that  demonstrate the hangar will be primarily used for aviation related purposes. c. The Aircraft Hangar must demonstrate safe ingress and egress from adjacent  properties and roads and storage ability of an aircraft with a wing span of thirty  feet or larger. d. Property owner(s) must sign a statement binding them and any future property  owner(s) from using the hangar for purposes other than primarily aviation related.  This statement shall be filed with the Wasco County Clerk's Office prior to  receiving zoning approval on a building permit application. e. The aircraft hangar is intended to be primarily used for the storage, maintenance,  and assembly of airplanes and other aviation related equipment. Additional storage  of a car, boat, motorcycle or other items is allowed as long as storage of these items  does not prevent the storage of an airplane. f. The aircraft hangar shall be limited to 2,500 square feet.
Aircraft hangar  construction 2004.