221-1, 221K1, 221K4, 221K5
* = specify color when ordering
Prices quoted are from a Singer repairman's manual dated 3/63 or **=9/38
***=Parts furnished only when repairs were made at factory
| Part Number | Part Name | Price |
|---|---|---|
| 145 | Three-Pin Terminal Body (male half) Screw | $0.06** |
| 171 | Connecting Rod Cap Screw | $0.15 |
| 208 | Feed Dog Screw | $0.05 |
| 233 | Position Plate Screw | $0.05 |
| 248 | Stop Motion Stop Screw | $0.05 |
| 289 | Braider Thumb Screw | $0.30 |
| 315 | Feed Bar Screw Center | $0.15 |
| 330 | Arm Top Cover Screw | $0.05 |
| 335 | Slack Thread Regulator Screw | $0.05 |
| 447 | Collar and Counterbalance Screw | $0.15 |
| 448 | Shaft Bushing Set Screw | $0.15 |
| 453 | Guide Bracket Set Screw | $0.05 |
| 457 | Tension Stud Set Screw | $0.05 |
| 460 | Pulley Set Screw for 193754 | $0.02** |
| 462 | Needle Bar Set Screw | $0.05 |
| 641 | Light Screw | $0.15 |
| 691 | Throat Plate Screw | $0.15 |
| 704 | Singerlight Lead Clamping Plate Screw | $0.06** |
| 999 | Feed Bar Hinge Screw | $0.15 |
| 1036 | Thread Take-up Set Screw | $0.15 |
| 1085 | Roller Screw Stud | $0.20 |
| 1134 | Needle Bar Position Screw | $0.35 |
| 1259 | Bevel Gear Set Screw | $0.15 |
| 1423 | Tension Bracket Screw | $0.15 |
| 1519 | Screw Center Nut | $0.15 |
| 1520 | Hinge Screw Nut | $0.15 |
| 1607 | Controller Resistance Screw Nut | $0.15 |
| 1735 | Feed Reversing Lock Nut | $0.15 |
| 1768 | Three-Pin Terminal (female half) Housing Screw Nut for 194521 | $0.05** |
| 1832 | Feed Forked Roller and Stud | $0.60 |
| 2102 | Tension Disc | $0.15 |
| 8217 | Feed Regulator Washer | $0.02 |
| 8422 | Thread Guard | $0.02 |
| 8505 | Face Plate Thread Guard (lower) Rivet for 45842 | $0.20** |
| 8879 | Spool Pin Washer * | $0.02 |
| 8879 | Bed Cover Plate (bottom) Screw Thumb Nut Washer | $0.01** |
| 8905 | Motor Screw Washer | $0.01** |
| 9046 | Arm Dowel Pin | $0.07** |
| 15445 | Feed Bar Screw Center | $0.30 |
| 23258 | Controller Resistance Unit Screw Washer (steel) for 194569 to 194571 | $0.01** |
| 25510 | Braider | $0.60 |
| 25525 | Bias Gauge | $0.30 |
| 25527 | Seam Guide | $0.30 |
| 25537 | Screw Driver (machine) (221-1) | $0.40 |
| 25637 | Under Braider Foot | $0.50 |
| 25893 | Hemmer (foot) for 1/4 in. hem | $0.70** |
| 25978 | Presser Foot )single toe) for gathering | $0.40** |
| 26075 | Thread Cutter and Holder | $0.15 |
| 32519 | Needle Bar Stop Pin for 45734 | $0.01** |
| 33624 | Thumb Screw Extension Pin | $0.30 |
| 33660 | Tension Releasing Lever Spring | $0.05 |
| 35505 | Embroidery Attachment, complete for two thread | $8.25 |
| 35931 | Hemmer (adjustable) (221-1, 221K4) | $2.50 |
| 35932 | Quilter | $0.80 |
| 36058 | Presser Foot for blind stitch cording, to turn small curves | $8.25 |
| 36067 | Presser Foot for braiding, for braid 1/16 in. to 3/16 in. wide | $2.95 |
| 36865 | Edge Stitcher (221-1, 221K4) | $0.70 |
| 45243 | Arm Shaft (upright) Bevel Gear (upper) with two 1259C, superseded by 45853, not interchangeable | $1.20** |
| 45316 | Arm Shaft (upright) Bevel Gear (lower) with two 1259C, superseded by 45852, not interchangeable | $1.50** |
| 45319 | Presser Foot Plate for 45321 | $0.40** |
| 45320 | Presser Foot Shank for 45321 | $0.25** |
| 45321 | Presser Foot (hinged), complete | $1.65 |
| 45329 | Presser Foot Hinge Pin for 45321 | $0.02** |
| 45339 | Thumb Nut Engaging Pin | $0.02 |
| 45701*** | Arm for 45814 | $9.00** |
| 45702 | Arm Shaft (horizontal) | $1.20** |
| 45703 | Arm Shaft (horizontal) Bevel Gear with two 1259C, superseded by 45851, not interchangeable | $1.50** |
| 45704 | Arm Shaft Bushing | $1.35 |
| 45705 | Arm Shaft | $1.95 |
| 45706 | Arm Shaft Bushing (lower) | $1.05 |
| 45707 | Arm Shaft Bushing (upper) | $1.05 |
| 45708 | Arm Top Cover * | $0.50 |
| 45709 | Top Cover Spool Pin | $0.15 |
| 45713 | Bed Extension * | $3.90 |
| 45714 | Bed Friction Washer | $0.02 |
| 45716 | Clamp Stop Motion Clamp Washer | $0.07** |
| 45717 | Stop Motion Bushing | $1.20 |
| 45719 | Face Plate | $1.95 |
| 45720 | Face Plate Thread Guard (upper) with 125373, for 45719 | $0.02** |
| 45721 | Feed Bar | $1.55 |
| 45722 | Feed Bar Connecting Link | $2.45 |
| 45723 | Connecting Link Hinge Stud | $0.05 |
| 45724 | Feed Cam and Lifting Eccentric | $1.95 |
| 45725 | Feed Connecting Rod | $2.50 |
| 45727 | Feed Forked Connection for 45754 | $0.80** |
| 45728 | Feed Rock Shaft | $1.35 |
| 45729 | Feed Rock Shaft Center (left) | $0.50 |
| 45730 | Feed Rock Shaft Center (right) | $0.50 |
| 45731 | Feed Regulator | $1.05 |
| 45732 | Feed Reversing Handle | $0.40 |
| 45733 | Rock Shaft | $1.70 |
| 45734 | Needle Bar | $1.95 |
| 45736 | Needle Bar Bushing | $2.50 |
| 45737 | Needle Bar Connecting Link for 45738, superseded by 45818, not interchangeable | $0.35** |
| 45738 | Needle Bar Connecting Link 45737 with 45739, superseded by 45819, not interchangeable | $0.85** |
| 45739 | Needle Bar Stud | $1.05 |
| 45740 | Needle Bar Crank with 1134 and 1259 | $0.90** |
| 45741 | Presser Bar | $1.95 |
| 45742 | Presser Bar Guide Bracket | $0.80 |
| 45743 | Presser Bar Lifter | $0.30** |
| 45744 | Presser Bar Hinge Pin | $0.05 |
| 45745 | Presser Bar Spring | $0.15 |
| 45747 | Rotating Hook with two 462, for 45816, superseded by 45827, not interchangeable | $2.65** |
| 45750*** | Rotating Hook Bobbin Case for 45751 | $1.50** |
| 45751 | Rotating Hook Bobbin Case complete | $5.80 |
| 45752 | Rotating Hook Bobbin Case Base for 45829 | $0.90 |
| 45754 | Feed Forked Connection 45727 with 1832 | $1.10** |
| 45755 | Rotating Hook Collar and Counterbalance with 447, superceded by 45833, not interchangeable | $0.30** |
| 45756 | Rotating Hook Gib (stationary) for 45816, superseded by 45831, not interchangeable | $2.40** |
| 45757 | Rotating Hook Shaft, superceded by 45834, not interchangeable | $0.35** |
| 45758 | Rotating Hook Shaft Bevel Gear with two 1259, superseded by 45854, not interchangeable | $1.10** |
| 45759 | Rotating Hook Shaft Bushing (back) for 45856 | $0.40** |
| 45760 | Rotating Hook Shaft Bushing (front) for 45856 | $0.40** |
| 45761 | Hook Loop Guard | $1.05 |
| 45763 | Stitch Indicator Plate * | $0.80 |
| 45764 | Tension Releasing Lever | $0.60** |
| 45765 | Clamp Stop Motion Flanged Bushing 45717 with 51350 | $1.00** |
| 45767 | Thread Take-up Crank, superseded by 45820, not interchangeable | $0.90** |
| 45768 | Thread Take-up Lever complete, superseded by 45822, not interchangeable | $0.95** |
| 45769 | Thread Take-up Lever Hinge Stud, for 45768, superseded by 45824, not interchangeable | $0.06 |
| 45770 | Thread Take-up Lever Link for 45768, superseded by 45825, not interchangeable | $0.30** |
| 45771 | Hinge Screw Washer | $0.15 |
| 45772 | Throat Plate for 45788 | $0.60** |
| 45773*** | Trade Mark for 45814 | $0.00 |
| 45775 | Hinge Screw Friction Washer | $0.02 |
| 45780 | Bed Cushion (rubber) | $0.05 |
| 45781 | Thread Take-up Lever for 45768, superseded by 45821, not interchangeable | $0.60** |
| 45782 | Thread Guard | $0.05 |
| 45785 | Bobbin | $0.20 |
| 45788 | Feed Dog | $1.95 |
| 45789 | Bobbin Case Tension Spring | $0.50 |
| 45790 | Thread Take-up Spring Thread Guard, superseded by 45873, not interchangeable | $0.07 |
| 45794 | Feed Reversing Handle | $0.60 |
| 45795 | Arm Top Cover * | $0.60 |
| 45797 | Needle Clamp Body 45848 with 51308 | $0.35** |
| 45798 | Bed Extension Screw Washer | $0.02 |
| 45800 | Bed Cover Plate with felt | $1.35 |
| 45807 | Position Plate Spring (back) | $0.60 |
| 45808 | Position Plate Spring (front) | $0.60 |
| 45809 | Needle Clamp Gib and Thread Guard | $0.30** |
| 45812 | Bobbin Winder Screw Washer | $0.05 |
| 45813 | Presser Bar Spring | $0.40 |
| 45814*** | Arm 45701 with 45706, 45707, 45773, and two each 15405 and 45704 | $12.00** |
| 45816 | Rotating Hook 45747 with 45756, 51357 and 51373 (For Agents only)superseded by 45828, not interchangeable | $5.10 |
| 45817 | Hand Wheel * | $3.15 |
| 45818 | Needle Bar Connecting Link | $0.80 |
| 45819 | Connecting Link, complete | $1.75 |
| 45820 | Thread Take-up Crank for 45823 | $1.95 |
| 45821 | Thread Take-up Lever for 45822 | $0.60** |
| 45822 | Thread Take-up Lever Complete for 45823 | $2.05 |
| 45823 | Thread Take-up Lever 45822 with 45771, 45819, 45820, 50056 and 50057 | $3.05** |
| 45824 | Thread Take-up Lever Hinge Stud for 45822 | $0.06** |
| 45825 | Thread Take-up Lever Link for 45822 | $0.30** |
| 45826 | Spool Holder Spring | $0.30 |
| 45827 | Rotating Hook with two 462, for 45828 and 45829 | $2.65** |
| 45828 | Rotating Hook 45827 with 45831, 200596 and 200614 (For Agents only) | $5.10** |
| 45829 | Rotating Hook 45827 with 45752, 45761, 45831, 200145, 200596 and 200614 for 45830 | $6.60** |
| 45830 | Rotating Hook and Bobbin Case complete, Nos. 45751 and 45829 | $9.20** |
| 45831 | Rotating Hook Gib for 458288 and 45829 | $2.40** |
| 45832 | Portable Carrying Case complete | $6.00** |
| 45833 | Collar and Counterbalance | $0.60 |
| 45834 | Rotating Hook Shaft | $0.80 |
| 45842 | Face Plate Thread Guard | $0.30 |
| 45843 | Bobbin Winder Tension Bracket for 45844, superseded by 45857, not interchangeable | $0.60** |
| 45844 | Bobbin Winder Tension Bracket complete, superseded by 45858, not interchangeable | $1.25** |
| 45845 | Bobbin Winder Tension Disc for 45844 and 45858 | $0.20** |
| 45846 | Bobbin Winder Tension Disc Screw Washer for 45844 and 45858 | $0.07** |
| 45847 | Tension Disc Spring | $0.15 |
| 45848 | Needle Clamp Body with 51256 for 45797 | $0.35** |
| 45849 | Bobbin Case Position Plate | $0.95 |
| 45850 | Position Plate, complete | $2.25 |
| 45851 | Arm Shaft (horizontal) Bevel Gear with two 1259 | $1.50** |
| 45852 | Arm Shaft (upright) Bevel Gear (lower)with two 1259 | $1.50** |
| 45853 | Arm Shaft (upright) Bevel Gear (upper)with two 1259 | $1.10** |
| 45854 | Rotating Hook Shaft Bevel Gear with two 1259 | $1.10** |
| 45855*** | Bed for 45856 | $12.00** |
| 45856*** | Bed for 45855 with 45759, 45760 and two 448Arm Shaft (horizontal) Bevel Gear with two 1259 | $1.50** |
| 45857 | Bobbin Winder Tension Bracket for 45857 | $0.60** |
| 45858 | Bobbin Winder Tension Bracket complete | $1.15** |
| 45859 | Bobbin Winder Frame with Pulley and Spindle | $0.80** |
| 45863 | Thread Regulator and Guide | $0.30 |
| 45864 | Tension Indicator Flange * | $0.15 |
| 45865 | Flange Stop Washer | $0.05 |
| 45866 | Tension Indicator * | $0.20 |
| 45868 | Tension Releasing Pin | $0.15 |
| 45869 | Tension Spring | $0.15 |
| 45870 | Tension Stud with Nut | $0.95 |
| 45871 | Tension, complete * | $2.25 |
| 45873 | Thread Guard | $0.15 |
| 45878 | Needle Clamp Body | $0.80 |
| 45879 | Gib and Thread Guard | $0.60 |
| 45886 | Arm Shaft | $4.55 |
| 45909 | Tension Releasing Lover | $1.35 |
| 45910 | Presser Bar Lifter | $0.60 |
| 45915 | Bobbin Winder Tension Disc | $0.40 |
| 45916 | Tension Disc Screw Washer | $0.40 |
| 45924 | Rotating Hook | $19.40 |
| 45925 | Hook and Bobbin Case | $25.20 |
| 45926 | Bobbin Case Base | $4.20 |
| 45927 | Shaft Bushing (back) | $0.85 |
| 45928 | Shaft Bushing (front) | $0.85 |
| 45929 | Bobbin Winder Frame | $1.10 |
| 45930 | Stop Motion Clamp Washer | $0.15 |
| 45931 | Bobbin Winder Tension Bracket | $2.40 |
| 45940 | Throat Plate | $1.95 |
| 45941 | Throat Plate, complete | $3.70 |
| 45945 | Bobbin Winder Frame * (221K5) | $1.55 |
| 45947 | Face Plate * (221K5) | $2.05 |
| 45948 | Light (less lamp and switch), complete * (221K5) | $4.50 |
| 50053 | Seam Guide Thumb Screw | $0.30 |
| 50054 | Pressure Regulating Thumb Screw | $0.60 |
| 50056 | Take-up Lever Cap Screw | $0.20 |
| 50057 | Take-up Link Hinge Screw | $0.35 |
| 50116 | Bed Cushion Screw | $0.15 |
| 50275 | Eccentric Set Screw | $0.15 |
| 50518 | Brush Tube Insulating Bushing Set Screw | $0.02** |
| 50353 | Feed Regulator Hinge Screw | $0.30 |
| 50684 | Face Plate Thumb Screw | $0.30 |
| 51093 | Three-Pin terminal (female half) Housing Screw for 194521 | $0.07** |
| 51104 | Binder Screw for 121464 | $0.02** |
| 51159 | Position Plate Spring Screw | $0.05 |
| 51208 | Motor Screw | $0.06** |
| 51256 | Needle Clamp Thumb Screw for 45848 | $0.20** |
| 51308 | Needle Clamp Screw | $0.15 |
| 51340 | Controller Resistance Unit Hinge Screw for 194418 | $0.07** |
| 51350 | Stop Motion Clamp Screw | $1.00 |
| 51351 | Stop Motion Bushing Screw | $0.15 |
| 51352 | Connecting Rod Hinge Screw | $0.35 |
| 51353 | Feed Forked Hinge Screw | $0.35 |
| 51354 | Tension Lever Hinge Screw | $0.15 |
| 51355 | Bobbin Winder Hinge Screw | $0.20 |
| 51357 | Rotating Hook Gib Hinge Screw for 45816, superseded by 200614, not interchangeable | $0.02** |
| 51361 | Bed Cover Plate Screw | $0.20 |
| 51363 | Stud Clamping Screw | $0.05 |
| 51367 | Singerlight Lamp Socket Screw for 193918 | $0.05** |
| 51369 | Field Coil Lead Clamp Screw | $0.05** |
| 51373 | Rotating Hook Gib Position Screw for 45816, superseded by 200596, not interchangeable | $0.05** |
| 51379 | Presser Foot Thumb Screw | $0.12** |
| 51380 | Bed Extension Hinge Screw | $0.20 |
| 51384 | Stitch Indicator Plate Screw | $0.05 |
| 51395 | Ruffler Shirring Plate Thumb Screw for 121170 | $0.10** |
| 51399 | Singerlight Lamp Socket Cap Screw for 194024 | $0.02** |
| 51401 | Light Lead Set Screw | $0.15 |
| 51472 | Arm Screw | $0.07** |
| 51484 | Singerlight Toggle Switch Leads Terminal Screw for 193890 | $0.02** |
| 51497 | Bobbin Winder Tension Disc Screw for 45844 and 45858 | $0.05** |
| 51582 | Three-Pin Terminal Body (male half) Post Thumb Nut for 192797 | $0.06** |
| 51621 | Screw Thumb Nut | $0.30 |
| 51622 | Stitch Regulating Nut | $0.20 |
| 51623 | Singerlight Toggle Switch Lock Nut for 193890 | $0.06** |
| 51681 | Tension Thumb Nut | $0.25 |
| 66774 | Thread Take-up Spring | $0.15 |
| 86742 | Ruffler, for one, six and twelve stitch ruffling (221-1, 221K1, 221K4) | $3.45 |
| 100401 | Tray (Trimmings for Portable Carrying Case) | $1.20** |
| 120378 | Screw Driver (tension) (221-1) | $0.15 |
| 120565 | Binder Screw Washer for 121464 | $0.01** |
| 120598 | Ruffler for one, six and twelve stitch ruffling, for 121142 | $1.25** |
| 120687 | Hemstitcher with Yielding Presser Plate | $0.85 |
| 120855 | Hemmer Foot, 5/64 in. hem | $1.55 |
| 120861 | Tin of Oil (3 oz.) (221K1) | $0.30 |
| 120862 | Oil Can, contents 1 1/3 fl. oz. filled with household oil | $0.10** |
| 120885 | Edge Guide (221K5) |  |
| 120914 | Feller (Foot) | $0.80 |
| 120962 | Hemmer (foot) flat bottom for 1/8 in. hem | $0.70** |
| 120966 | Binder Folder, superseded by 121461, not interchangeable | $0.40** |
| 120968 | Binder Foot, superseded by 121463, not interchangeable | $0.35** |
| 121141 | Attachment Set for 121142, Nos. 8879, 25527, 25527, 25537, 35931, 36583, 50053, 120378, 120855, 121464, five 45785 and six needles | $4.80** |
| 121142 | Attachment Set complete, Nos 120598 and 121141 | $6.00** |
| 121170 | Ruffler Shirring Plate | $0.50 |
| 121309 | Feed Cover Plate | $0.75 |
| 121441 | Gathering Foot (double toe) (221-1, 221K4) | $0.70 |
| 121461 | Binder Folder for 121464 | $0.40** |
| 121463 | Binder Foot for 121464 | $0.35** |
| 121464 | Binder, complete (221-K1, 221K4, 221K5) | $1.35 |
| 121614 | Presser Foot for blind stitch braiding | $3.95 |
| 121615 | Presser Foot Braid Guide for 121634 | $0.00** |
| 121632 | Needle Threader (universal) | $0.25 |
| 121718 | Presser Foot with Extension and Graduated Adjustable Guide, complete | $2.95 |
| 121725 | Finger Guard | $0.45 |
| 125373 | Face Plate Thread Guard (upper) Rivet for 45720 | $0.20** |
| 125375 | Bobbin Winder Tension Disc Spring, superseded by 45847, not interchangeable | $0.07** |
| 127615 | Presser Foot Braid Guide | $1.70 |
| 131441 | Gathering Foot (double toe) (221K1) | $0.70 |
| 136065 | Oil Can Holder with two wood screws 3/8 in. No. 3 Rd. Hd. (Trimmings for Portable Carrying Case) | $0.12** |
| 136066 | Tray Hole Cover Rivet (short) for 136082 and 136084 | $0.02** |
| 136067 | Tray Hole Cover Rivet (long) for 136082 and 136084 | $0.02** |
| 136080 | Cover Lock Key (Trimmings for Portable Carrying Case), superseded by 136152, not interchangeable | $0.10** |
| 136082 | Tray Hole Cover with two 136067 and three 136066, to cover the needle bar and presser bar clearance hole (Trimmings for Portable Carrying Case) | $0.60** |
| 136145 | Cover Lock Hasp Rivet for 136151 | $0.01** |
| 136145 | Cover Lock Rivet for 136150 and 136189 | $0.01** |
| 136148 | Cover Hinge with four 136149 | $0.12** |
| 136149 | Cover Hinge Rivet for 136148 | $0.01** |
| 136150 | Cover Lock (left) with four 136145 | $0.30** |
| 136151 | Cover Lock Hasp with two 136145 | $0.30** |
| 136152 | Cover Lock Key | $0.12** |
| 136153 | Handle (leather) | $0.35** |
| 136157 | Slide | $0.02** |
| 136189 | Cover Lock (right) with four 136145 | $0.30** |
| 140099 | Controller Base Screw for 194583 to 194585 | $0.06** |
| 140100 | Controller Resistance Unit Bell Crank Spring Bracket Screw for 194569 to 194571 | $0.02** |
| 140103 | Controller Resistance Unit Screw for 194569 to 194571 | $0.07** |
| 140138 | Tension Disc Screw | $0.15 |
| 140167 | Tension Stud for 45870 | $0.30** |
| 140240 | Presser Foot Thumb Screw | $0.35 |
| 140694 | Hook Gib Screw | $0.15 |
| 141050 | Face Plate Thumb Screw (221K5) | $0.35 |
| 141052 | Pressure Regulating Thumb Screw (221K5) | $0.35 |
| 141053 | Stitch Indicator Knob Screw (221K5) | $0.35 |
| 160359 | Binder (slotted) with Pin Tape Guide (221-1) | $1.25 |
| 160506 | Buttonholer, complete | $9.95 |
| 160719 | Darning and Embroidery Attachment, complete | $2.95 |
| 160741 | Walking Presser Foot, complete | $3.95 |
| 160809 | Attachment Set, complete (221-1) | $9.20 |
| 160845 | Presser Foot (left toe) Cord and Zipper Work | $0.70 |
| 160846 | Presser Foot (right toe) cord and Zipper Work | $0.70 |
| 160927 | Under Braider | $0.65 |
| 161127 | Presser Foot (hinged, adjustable) for cording and slide fasteners | $1.45 |
| 161157 | Zigzagger Attachment, complete Style-O-Matic | $4.95 |
| 161294 | Screw Driver (machine) (221K1, 221K4, 221K5) | $0.35 |
| 161295 | Screw Driver (tension) (221K1, 2221K4, 221K5) | $0.15 |
| 161307 | Needle Threader (wire) (221K1) | $0.15 |
| 161329 | Attachment Set, complete (221K1) | $10.95 |
| 161609 | Tube of Oil (1/2 oz.) (221K4, 221K5) | |
| 170135 | Rotating Hook | $11.95 |
| 170160 | Rotating Hook Gib | $1.95 |
| 170167 | Rotting Hook, complete | $14.10 |
| 171071 | Darning Foot (221K1) | $1.75 |
| 190074 | Grease Cup Wick (felt) | $0.01** |
| 190075 | Grease Cup Wick Spring | $0.02** |
| 190613 | Tube filled with Singer Motor Lubricant | $0.15** |
| 191097 | Armature Shaft Thrust Washer (fibre) | $0.01** |
| 191098 | Armature Shaft Thrust Washer (paper) | $0.01** |
| 192140 | Controller Resistance Unit for 95 to 145 volts, for 194570 | $2.50** |
| 192141 | Controller Resistance Unit for 150 to 250 volts, for 194571 | $2.50** |
| 192211 | Controller Resistance Unit for 32 to 55 volts, for 194569 | $2.50** |
| 192424 | Field Coil Retainer | $0.10** |
| 192457 | Brush (carbon) for 3-32, 3-50, 3-100, 3-110, 3-118, 3-125, 3-145 and 3-165 motors | $0.10** |
| 192458 | Brush Spring | $0.03** |
| 192692 | Three-Pin Terminal (female half) Insert Clamp for 194521 | $0.01** |
| 192797 | Three-Pin Terminal Body (male half) complete, three each 51582 and 701719 | $0.50** |
| 193543 | Brush Cap | $0.05** |
| 192985 | Controller Resistance Unit Adjusting Nut, superseded by 194774, not interchangeable | $0.20** |
| 193546 | Brush Tube Insulating Bushing | $0.15** |
| 193754 | Pulley with 460 | $0.15** |
| 193799 | Brush (carbon) for 3-220, 3-228, 3-230, 3-250 and 3-258 motors | $0.10** |
| 193879 | Field Core complete | $1.50** |
| 193881 | Grease Cup | $0.02** |
| 193883 | End Cover (commutator end) with Arature Shaft Bearing Sleeve | $1.00** |
| 193884 | End Cover (pulley end) with Armature Shaft Bearing Sleeve | $1.00** |
| 193887 | Field Coil complete for 3-110 Motor | $1.25** |
| 193890 | Singerlight Toggle Switch for 193891 | $0.00** |
| 193891 | Singerlight Toggle Switch with Lead complete, Nos. 193890 and 193892 (221-1, 221K1, 221K5) | $1.25** |
| 193892 | Singerlight Toggle Switch Lead complete for 193891 | $0.15** |
| 193897 | Singerlight Lead Clamping Plate | $0.06** |
| 193898 | Singerlight Shade and Lamp Socket Housing with 51401, for 193918 (221-1, 221K1) | $1.00 |
| 193900 | Armature complete for 3-100 and 3-110 Motors | $5.00** |
| 193905 | Commutator complete | $0.00** |
| 193908 | Field Coil Lead Clamp | $0.03** |
| 193909 | Field Coil Lead Clamp Insulation | $0.01** |
| 193910 | Field Coil Lead Insulating Plate | $0.02** |
| 193911 | Singerlight Lamp Socket for 194024 | $0.25** |
| 193912 | Singerlight Lamp Socket Cap for 194024 | $0.25** |
| 193915 | Singerlight Lamp Socket Terminal compete for 194024 | $0.15** |
| 193917 | Singerlight Lead (lead insulated) complete for 194024 | $0.60** |
| 193918 | Singerlight (less lamp and switch) complete | $2.15** |
| 193919 | Singerlight Toggle Switch Thumb Nut for 193890 | $0.10** |
| 193920 | Singerlight Toggle Switch Insulation | $0.01** |
| 193945 | Armature complete for 3-32 Motor | $5.00** |
| 193946 | Armature complete for 3-50 Motor | $5.00** |
| 193947 | Armature complete for 3-125 Motor | $5.00** |
| 193948 | Armature complete for 3-145 Motor | $5.00** |
| 193949 | Armature complete for 3-165 Motor | $5.00** |
| 193950 | Armature complete for 3-220 and 3-258 Motors | $5.00** |
| 193951 | Armature complete for 3-230 and 3-250 Motors | $5.00** |
| 193952 | Armature complete for 3-118 Motor | $5.00** |
| 193953 | Armature complete for 3-228 Motor | $5.00** |
| 193954 | Field Coil complete for 3-32 Motor | $1.25** |
| 193957 | Field Coil complete for 3-50 Motor | $1.25** |
| 193960 | Field Coil complete for 3-100 Motor | $1.25** |
| 193963 | Field Coil complete for 3-125 Motor | $1.25** |
| 193966 | Field Coil complete for 3-145 Motor | $1.25** |
| 193969 | Field Coil complete for 3-165 Motor | $1.25** |
| 193972 | Field Coil complete for 3-220 Motor | $1.25** |
| 193975 | Field Coil complete for 3-250 Motor | $1.25** |
| 193978 | Field Coil complete for 3-118 Motor | $1.25** |
| 193981 | Field Coil complete for 3-228 Motor | $1.25** |
| 193984 | Field Coil complete for 3-258 Motor | $1.25** |
| 193993 | Motor Lead Tube | $0.03** |
| 194024 | Singerlight Lamp Socket 193911 with 193912, 193912, 193917 and two each 51399 and 193915, for 193918 | $1.50** |
| 194113 | Brush Tube | $0.08** |
| 194120 | Singerlight Lamp | $0.65** |
| 194144 | Belt (moulded) | $0.30** |
| 194321 | Controller Foot Pedal for 194583 to 194585 | $0.10** |
| 194402 | Controller Resistance Unit Bell Crank Spring Bracket for 194418 | $0.30** |
| 194404 | Controller Resistance Unit Bell Crank Spring for 194569 to 194571 | $0.30** |
| 194407 | Controller Base Cushion (rubber) for 194583 to 194585 | $0.03** |
| 194416 | Controller Resistance Unit Bell Crank for 194418 | $0.25** |
| 194418 | Controller Resistance Unit Bell Crank Spring Bracket 194402 with 194416, 194773 and two each 1607 and 51340, for 194569 to 194571 | $1.10** |
| 194514 | Controller Resistance Unit Bell Crank Spring Bracket Screw Insulating Disc for 194569 to 194571 | $0.01** |
| 194521 | Three-Pin Terminal (female half) complete | $0.50** |
| 194569 | Controller Base 194572 with 192211, 194418, 194774, 194775 and two each 23258, 140100, 140103, 194404, 194514 and 931090, for 194583 | $3.50** |
| 194570 | Controller Base 194572 with 192140, 194418, 194774, 194775 and two each 23258, 140100, 140103, 194404, 194514 and 931090, for 194584 | $3.50** |
| 194571 | Controller Base 194572 with 192141, 194418, 194774, 194775 and two each 23258, 140100, 140103, 194404, 194514 and 931090, for 194585 | $3.50** |
| 194572 | Controller Base for 194569 to 194571 | $0.50 |
| 194573 | Controller Cover for 194583 to 194585 | $1.00 |
| 194574 | Controller Lead Cord compleet with Three-Pin Terminal (female half) from lamp socket to three-pin terminal and controller for 194583 to 194585 | $1.50** |
| 194583 | Controller complete, for 32 to 55 volts, A.C. or D.C. Motor, Nos. 194321, 194569, 194573, 194574, 899287, two 964317 and four each 140099 and 194407 | $6.00** |
| 194584 | Controller complete, for 95 to 145 volts, A.C. or D.C. Motor, Nos. 194321, 194570, 194573, 194574, 899815, two 964317 and four each 140099 and 194407 | $6.00** |
| 194585 | Controller complete, for 150 to 250 volts, A.C. or D.C. Motor, Nos. 194321, 194571, 194573, 194574, 899287, two 964317 and four each 140099 and 194407 | $6.00** |
| 194773 | Controller Resistance Unit Yoke for 194418 | $0.30** |
| 194774 | Controller Resistance Unit Adjusting Nut for 194569 to 194571 | $0.15** |
| 194775 | Controller Resistance Unit Adjusting Nut Lock Spring for 194569 to 194571 | $0.05** |
| 196326 | Light Shade (221K4) | $1.55 |
| 199005 | Light Socket, complete with Switch (221K4) | $4.30 |
| 200145 | Loop Guard Screw | $0.05 |
| 200592 | Tension Spring Screw | $0.05 |
| 200596 | Rotating Hook Gib Screw for 45828 and 45829 | $0.05 |
| 200614 | Rotating Hook Gib Hinge Screw for 45828 and 45829 | $0.02** |
| 200964 | Rotating Hook Bobbin Case Latch Stop Screw for 45751 | $0.05 |
| 201016 | Rotating Hook Bobbin Case Tension Spring Regulating Screw for 45751 | $0.15 |
| 206731 | Rotating Hook Bobbin Case Latch Fulcrum Pin for 206736 | $0.01 |
| 206735 | Rotating Hook Bobbin Case Latch for 206736 | $2.05 |
| 206736 | Bobbin Case Latch, complete | $2.60 |
| 206737 | Latch Lever | $0.55 |
| 210736 | Latch Spring | $0.05 |
| 701719 | Three-Pin Terminal Body (male half) Post Washer for 192797 | $0.01 |
| 701994 | Singerlight Lamp Socket Insulating Washer (felt) for 193918 | $0.02 |
| 727511 | End Cover (pulley end) Lead Bushing (rubber) | $0.03 |
| 899678 | Name Plate and Core Shield for all Motors except 3-110 | $0.50 |
| 899700 | Name Plate and Core Shield for 3-110 Motor | $0.55 |
| 899287*** | Name Plate for 194583 and 194585 | $0.15 |
| 899815*** | Name Plate for 194584 | $0.15 |
| 931090 | controller Resistance Unit Screw Washer (asbestos) for 194569 to 194571 | $0.01 |
| 964317 | Name Plate Drive Screw for 194583 to 194585 | $0.02 |
| | Needles (6) Cat. 2020 (15xl) 3 each of sizes 11 and 14 | $0.30 |