I am now making High Quality Infill Hand Plane and Woodworking Hardware at Affordable Prices. 
This is was the first webpage I made and my first tool design that did not work very well as the top warped due to I used two different material and did not have on one side the same as the other :(
I have since built a new plastic and aluminum table top and fence system and hope to post images of it soon..
(Click on thumbnail to view full size)
I will add the plans to this soon as I measure it up..
Below is my work prints
My work prints they not a exact copy of my table but what I used to make mine.
The split fence side is different along with holes and slots, the materials sizes are correct..
Here is some more pictures of the router table and my shop (the driveway) hehehe
MKIII Sharpening Machine I have almost finished building a LV style MKII \ Lap Sharp sharpening system.. I call it my MK III, the total cost so far is about $70, I used a 1/3HP GE motor and some Pillow Blocks, a Jet Lathe 8" Face Plate with a 5/8" shaft and some pulleys.. So far I have only flatten blade backs and it works super. I have clad the plywood with a sheet of SS metal and will build or buy a tool rest soon.. You can view the images and description.. |
Hand Planes 101This is a collection of pages I have put together with all the methods I use in tuning and refinishing hand planes for my self and as a service I provided to woodworking forum members on the internet ..I am no longer refinishing hand planes but I am trying to explain with pictures and text the methods I use.. |
Back Yard Heat Treating Oven had started making blades for hand planes and marking knives and needed a klim to do the heat treating.. This page explains where and how I made my oven and how to heat and harden 0-1 Tool Steel. |
Machine Shop Lathe Service have started making hardware parts for infill and woodworking tools.. So far I have a hand full of customers I have made items for.. These vary from First Class Norris Style Depth Adjusters to Lever Cap Screws to Frame Saw Adjusting Screws to Back Saw Screws.. Check out my Machine Shop page to view some of the items I have made already.. I have planes to also start making small hand tools.. |
Got Wood? I have a few places I found for great wood deals, Justin Holden's www.exoticwoodsoftheworld.com |
Your Cutting Edge A Collection of pages on different methods of sharpening plane irons, chisels and various other cutting tools.. The Main Page contains methods include Bench Stoned, Scary Sharp Method that is using sand paper glued to a flat surface like glass of granite, Power Sharpening page explains use of motor driven sharpening tools, Sharpening Jigs and Gauges as well as Super Charging, what I call adding loose abrasive grit to sandpaper or bench stone to renew the cutting action,Getting Started page has a short list of tools I think is necessary for sharpening. |
