Plastic Lizards

Plastic lizards are versatile lures that mimic live salamanders or newts. Many anglers believe these creatures are predators of bass eggs and that they provoke an aggressive response from bedding bass. Like plastic worms, lizards can be rigged in a number of ways.

PLASTIC LIZARDS vs. PLASTIC WORMS: Although plastic lizards are similar in many ways to plastic worms, these differences should be noted: 1. The plastic lizard is a bulkier lure. It is therefore heavier and easier to cast when unweighted, and easier for the bass to see when visibility is limited. 2. The plastic lizard has more action. Besides its tail, it has four legs which writhe when the lure moves. 3. The plastic lizard resembles a salamander, which is thought to be an egg predator of bedding bass.

WHEN TO FISH PLASTIC LIZARDS: Spring is regarded as prime time for lizard fishing by most anglers. However, this lures can also be fished successfully in summer and fall as well, especially on a Carolina rig. In early spring, lizards are usually best when the water is stained to murky. However, you should also try lizards in clear 65 to 75 degree water when bass are bedding or holding around flooded bushes.

WHERE TO FISH PLASTIC LIZARDS: 1. Close To Shallow Wood Cover. Fish around stumps, logs, brush in early spring, when the water is from 45 to 60 degrees. 2. On Largemouth Spawning Beds. These lures often provoke vicious responses from bedding fish. 3. Around Shallow Flooded Bushes In Clear To Slightly Stained Water. Rigged weightless, lizards may be used as a sight fishing lure under these conditions. 4. When Rigged Carolina Style, On Deep Structure. This includes the ends of points, channel drop offs, ditches, humps and submerged roadbeds. Just about anyplace you'd fish a deep diving crankbait or plastic worm. 5. In Thick Weed Cover. The bulkier profile of the lizard makes the lure more visible than a plastic worm in dense grassbeds. 6. On Top Of Surface Weeds. Properly rigged, a lizard can scoot over the top of pond scum, lilypads, matted hydrilla or milfoil and the like, and draw an explosive strike from a bass. 7. In Deep, Clear Lakes At Night In Hot Weather. The added bulk and action of a plastic lizard make it a good choice for night fishing.

RIGGING PLASTIC LIZARDS: These lures have become much more popular in recent years as the popularity of alternative rigging method has soared. 1. Texas Rig. Here, the lizard is rigged with the hook point buried back into the body of the lure, just as when Texas rigging a plastic worm. A worm sinker is used; this can be either pegged or allowed to slide freely on the line. 2. Floating Rig. Rig the lizard on an abrasion resistant mono leader and use a swivel. 3. Carolina Rig. Substitute the lizard for a plastic worm. Vary the leader length according to bottom conditions. 4. Split Shot Rig. In clear water, use a 4 inch lizard on 4 to 8 pound line. Use a light wire worm hook rigged Texas style and pinch a split shot from 18 to 24 inches ahead of the lizard. 5. On A Leadhead. Rig the lizard openhooked on a 1/16 to 3/8 oz. leadhead. This is ideal when fishing a clear, rocky lake, especially at night. 6. Jig Trailer. A plastic lizard may be used as a jig trailer when flipping or pitching heavy cover, especially weedbeds.

PLASTIC LIZARD TACKLE : Tackle used will depend on conditions. In clear, shallow water, a stiff 6 to 6 foot 3 inch spinning rod and 8 to 10 pound test line will work. In stained water, use a worm rod, pitching rod, or flipping stick and heavy mono or high tech line. In open water when Carolina rigging, use a 6 1/2 to 7 foot baitcasting rod and 10 to17 pound test leader line. In open water when split shotting, use a medium action spinning outfit and 4 to 8 pound test mono. At night, use a medium heavy spinning rod and 8 pound test line or a medium heavy baitcaster and 12 to 14 pound test line. Bed Fishing Presentation. When bass are spawning, either rig the lizard weightless with a worm hook that will slowly sink it, or with a light worm sinker or split shot. Cast well past the bed and reel slowly so the lizard drags bottom as it moves toward you. Bottom contact will supply the needed erratic action. When you see the bass pick up the lizard, set the hook hard. Vary the speed of retrieve and inject intermittent pauses as necessary to trigger a response from the bass.

LIZARD SIZES AND COLORS: Lizards come in 4, 6, 7, and 9 inch sizes. In gin clear water, the 4 and 6 inch sizes are best. In low visibility situations or where bass run unusually big, try the larger sizes. Live salamanders and newts come in a rainbow of colors. Many are drab brown, black or olive green; others are bright red, orange or yellow. Some aquatic varieties are white. In nature, certain bright colors, especially yellow, are warnings that the creature may have an unpleasant taste or even be dangerous. Predators learn to avoid these creatures. Wasps, bumblebees, coral snakes and electric eels all have bright yellow markings and so do many salamanders. A plastic salamander with bright yellow or red dots or stripes may trigger bass to strike under some conditions, but if you aren't getting a response from the fish, switch to a more discreet color. Many anglers report success using lizards in watermelon green, brown and black. If more visibility or a trigger component is desired, try combining an orange or chartreuse tail or legs with these drab colors. Colors may be fine tuned in the boat by using one of the worm dye products available.