This is my 1985 RZ350. I bought this bike in 1992. The previous owner had installed a K&N filter kit and Factory pipes. All I did at that time was add a steering dampener and eliminate the rear fender. It had been wrecked when I bought it, but not bad enough to flex the frame. I put about 10,000 miles on it. Some were on the racetrack at Road Atlanta. In 1996 I completely stripped the bike down to the frame, cleaned and replaced some chassis parts, and rebuilt the motor. While I had the pipes off I noticed they were about rusted through in the header area. So I replaced them with DGs. The DGs are decent pipes, but not as good as the Factory ones. I also did some mild porting, installed Boyseen reeds, stainless brake lines, and a Telefix fork brace.
I decided to keep the stock look and not go any further with chassis modifications. Instead I purchased another 1984 RZ350 to do all the popular FZ and FZR conversions. See the RZ350R Project page for my progress.
|