*We
Also Offer Custom Sizes and Custom Cut Magnetics
Attention
Grabbing Designs Or Reproduction Of Your Existing Artwork
Please
view the Gallery of Magnetic Vehicle Sign Designs
We Have Created Below
Produced
From MagnumŽ Magnetic Sheeting and Oracal
Vinyl
Our
magnetic car signs are .030 in. (.76 mm).
This
thickness provides the holding strength needed
to keep signage in place while the vehicle
is moving
Weatherability
MagnumŽ
brand flexible magnetic sheeting performs well in
adverse weather (such as rain, sleet and snow),
and in temperatures from -15° F to 160° F (-26°
C to 71° C).
We
also use MagnumŽ flexible magnetic material because
it is produced and tested in the U.S.A.
The
two manufacturing facilities are located in Ohio.
As a result, they control the content of there magnetic
materials from start to end. You can be sure your
magnet passes established toy safety standards for
heavy metals content if you purchase our MagnumŽ
flexible magnetics.
We
accept Credit Card Payments with paypal.com. We also
except Money Orders, Company and Cashiers Checks.
If you deside to purchase, we will send you an invoice
via email.
Attention
Grabbers Signs and Vehicle Graphics is a Custom Sign
Shop where we pride ourselves in our ability to create
unique, "attention grabbing" designs and logos for
your company signage and advertising. We truly believe
that the signs you have for your business, are a sign
of the business you will have. We have over 20 years
experience in sign design and manufacturing. Our business
is aimed at business' who are looking for professional
signs with an "Attention Grabbing" effect at affordable
prices.
Magnetic
Sign Care and Application
Storing Magnetic
Signs
When
not using your flexible magnetic sign, keep
it in a clean, dry place.
Store
your rolled magnetic sign on end with the
printed or vinyl side out.
When
storing flat, be sure your magnet is on a
level surface. Avoid placing objects on top
that could damage the face; do not stack with
magnetic sides facing each other.
Preparing Magnetic-Receptive
Surfaces
Before
affixing your magnetic sign to a metal surface,
be sure all surface paints, clear coats and
waxes are cured (hardened).*
Clean
the metallic surface and the magnet with mild
detergent.
Wipe
with a soft cloth or allow to dry.
*(Approximate curing times: paint-90 days;
clear coat-60 days; wax-2 days.)
Applying Magnetic
Signs
If possible,
affix to a smooth, flat or gently curved metallic
surfaces.
Make
sure the entire magnet is flat against the
metal surface (i.e., no air pockets).
If you
place the magnet in the wrong position, completely
remove the magnet from the surface and reaffix.
Do not pull the magnetic sign across the surface,
or it may stretch due to the resistance caused
by the high magnetic strength.
Avoid
use on horizontal metal surfaces exposed to
direct sunlight (such as automobile hoods)
or temperatures exceeding 150 degrees F.
Be aware
that long-term use on surfaces frequently
exposed to sunlight (such as vehicles) can
result in uneven fading of the surface because
the magnet-covered area is shielded from ultraviolet
rays.
Avoid
use on nonmetallic body fillers, simulated
wood grain siding and repainted surfaces.
Cleaning Magnetic
Signs
To guard
against moisture and dirt buildup between
the magnet and the metal surface (particularly
on outdoor applications), remove the magnet
at regular intervals. Clean both the magnet
and metal surface with mild detergent; wipe
with a soft cloth or allow to air-dry. (For
vehicle-mounted signs, remove and clean WEEKLY.)
To protect
fresh clear coat, base coat and/or vinyl surfaces
on new cars and trucks, remove magnetic signs
DAILY.
Proper
use and care will extend the life of your magnetics
and protect the metallic surface of your vehicle.
