MAGNETIC SIGNS

Attention Grabbers (Mr. Magnetick) designs and produces your magnetics from high quality 3 mil magnum magnetic material and high performance vinyl. They have a 7 to 10 year life, unlike printed magnetics which last 1-3 years. We use the same high quality vinyl we use for our vehicle graphics that we apply directly on commercial vehicles. Your magnetics can even be cut to fit many different designs and shapes. We also sell these under the name of Mr. Magnetick @ http://magnetic-vehicle-signs.com.

<<< RETUTN TO HOME PAGE>>>

	Vehicle Graphics
	Banners
	Vinyl Decals
	Magnetic Signs
	Yard Signs
	3D Signs
	Logo Design

Please click on the buttons above to view our products.

Email us for a free quote on any sign, banner or vehicle graphics .

For Your Magnetic Signs

We Use Only The Highest Grade Magnetic Material and High Performance Vinyl.

These signs can be applied directly to your car, van, truck or trailer.

• When not using your flexible magnetic sign, keep it in a clean, dry place.
• Store your rolled magnetic sign on end with the printed or vinyl side out.
• When storing flat, be sure your magnet is on a level surface. Avoid placing objects on top that could damage the face; do not stack with magnetic sides facing each other.

• Before affixing your magnetic sign to a metal surface, be sure all surface paints, clear coats and waxes are cured (hardened).*
• Clean the metallic surface and the magnet with mild detergent.
• Wipe with a soft cloth or allow to dry.
  *(Approximate curing times: paint-90 days; clear coat-60 days; wax-2 days.)

• If possible, affix to a smooth, flat or gently curved metallic surfaces.
• Make sure the entire magnet is flat against the metal surface (i.e., no air pockets).
• If you place the magnet in the wrong position, completely remove the magnet from the surface and reaffix. Do not pull the magnetic sign across the surface, or it may stretch due to the resistance caused by the high magnetic strength.
• Avoid use on horizontal metal surfaces exposed to direct sunlight (such as automobile hoods) or temperatures exceeding 150 degrees F.
• Be aware that long-term use on surfaces frequently exposed to sunlight (such as vehicles) can result in uneven fading of the surface because the magnet-covered area is shielded from ultraviolet rays.
• Avoid use on nonmetallic body fillers, simulated wood grain siding and repainted surfaces.

• To guard against moisture and dirt buildup between the magnet and the metal surface (particularly on outdoor applications), remove the magnet at regular intervals. Clean both the magnet and metal surface with mild detergent; wipe with a soft cloth or allow to air-dry. (For vehicle-mounted signs, remove and clean WEEKLY.)
• To protect fresh clear coat, base coat and/or vinyl surfaces on new cars and trucks, remove magnetic signs DAILY.