A Special Complete Set
This set consists of a collar, wrist cuffs, and ankle cuffs. The quality is very high, and suede lining
is now provided as standard. These are designed with the Professional Dominatrix in mind.
~~~~~~~
THE COLLAR
Heavy duty construction, with a fixed ring in the center - no fumbling to get a leash on it. A Brass
fixed-ring is provided for easy leash attachment . Two smaller solid brass D-rings on the side allow for other
possibilities as well.
Brass Chicago Screws, rather than rivets, are used throughout. Rivets tend
to pull apart, usually at the worst possible time. Chicago Screws won't pull out.
After assembly, a suede lining lines the inside to hide the hardware.
The fixed ring just begs for submission....
a brass finished dangley ring can be substituted.
A brass plate with the Owners initials or name on it is rivited to the collar. There is a limit to how many
letters will fit on the plate... about 8-10 characters, depending on what the letters are.
A locking roller buckle is provided. This buckle is black steel, but brass finished steel will be standard when
a special custom shipment arrives, sometime in March they tell me.
~~~~~~~
THE WRIST CUFFS
A Solid Brass D-ring is used. The Black Locking Roller Buckle will be replaced with
Brass Finished Steel sometime in March. This picture shows the inside surface prior to
covering with suede.
like the collar, a suede lining covers the inside hardware
~~~~~~~
THE ANKLE CUFFS
Two Solid Brass D-Rings are provided
As with the rest of the set, a locking roller buckle is standard. This one is Black Steel, but Brass
Finished Steel will be standard sometime around March.
Note the brass rectangular belt loop that holds the excess tang material when the smaller
setting holes are used. This gives a wide adjustment range without the excess tang material
flopping around. It can fit a bare leg perfectly, or slide some ladies boots on him and it will
still fit fine :-).
These pictures show the cuffs prior to installation of the suede lining, to demonstrate the quality of construction materials
|
~~~~~~~~~
SIZING:
Collar: three adjustment holes (3/4 inch apart). The tightest hole will be the measurement
You give me... the measurement should be snug... not overly tight.
Wrist cuffs: three adjustment holes (3/4 inch apart). The MIDDLE hole will be the size You
give me, allowing for one size tighter or one size looser.
Leg Cuffs: What i have found is that off-the-shelf leg cuffs leave a lot to be desired as far as adjustablilty.
They usually have too limited a range of adjustment. Often a slave will be made to wear either men's or women's boots rather than
bare legs. Cuffs designed for bare legs usually will not fit over boots.
What i am offering in this package is a set of leg cuffs that have a very large adjustment range -
5 holes, each 3/4 inch larger than the previous one. The second smallest hole will be the size You
give me.
Normally with this much adjustment range it would mean that when on bare legs there would be quite a long end of the fastening strap
dangling about. To deal with this, an extra rectangular brass belt loop is provided to retain the
excess strap when bare legs are used.
OPTIONS:
The following options are available at no charge:
On the collar, instead of the fixed brass ring, a dangling brass or nickle finished ring can be substituted
D-Rings on all parts of the set can be brass as shown, or nickle finished instead.
generally the Chicago screws that fasten the leather together will be brass or nickle, to match the D-Rings
Locking roller buckles on all parts of the set can be Black, Nickle, or Brass finished
note that the name plate on the collar is only available in brass.
Padlocks... not included with the set, but i have access to several styles of padlocks that are of the "one key fits all" type.
Styles available include brass, black standard padlock, and also a heart-shaped padlock in either nickle or gold (brass) color.
The heart shaped padlock is not quite as rugged as the standard padlock. However, it takes a standard handcuff key to open it... for You convinience :-)
Let me know if You are interested in padlocks.
~~~~~~~~~
This is a made to order set, not a one-size-fits-all.
Cost of this special set is $215 plus shipping. Delivery typically will run 2 weeks after reciept of
payment.
The items are also available separately... collar-$70, wrist cuffs-$70/pair, ankle cuffs-$80/pair,
plus shipping.
Back to Home Page
