1) Fly an end-box to end-box rectangle
a. Watch proper distance
b. Watch parallel with ground – no climb / descent
c. Stay parallel with the runway – Z distance
d. Watch corner radii
e. Watch wings level, inverted and upright
f. Watch vertical uplines and downlines (Z distance)
g. Control airspeed

2) Fly #1 inverted watching all the same things

3) Fly #1 with 45 up / down at center
a. Watch radii into 45 lines
b. Watch 45 lines
c. Watch all #1 above

4) Fly it inverted

5) Fly #1 with square loop in the center
a. Fly with square Horizontal 8 / Vertical 8

6) Fly a 45 up/down on center with a ½ roll – both up and down lines
a. Put a full roll in the center
i. FAI – put a 4 point roll in the center, or 4 of 8
ii. Inverted to inverted roll

7) Loops
a. Fly #1 with a loop in the center, from top and bottom
b. Fly #2 with a loop in the center, from top and bottom
c. Put a ½ loop at each end of the rectangle
i. Fly it inverted

8) Rolls
a. Fly rectangle with slow roll on top (inv to inv) and bottom
b. Fly rectangle with 4-point on top (inv to inv) and bottom