Below are images of the front an backside with wiring locations identified.

Step Up Converter Boards

Badboy

 Click on picture to see a larger version. Click on picture to see a larger version.

Badboy Revision 4

  

Madmax

 Click on picture to see a larger version. Click on picture to see a larger version.

 

 

Micro Converter

 

 

 

Step Down Converter Board

Down Boy

 Click on picture to see a larger version.  

Down Boy Revision 2

Down Boy Revision 3

  

 

Emitter Board

Nexgen

 

Wiz2

 

Step Up/Down Converter Boards

Wizard
Revision 01

 Click on picture to see a larger version. Click on picture to see a larger version.

Wizard
Revision 02

NOTE: Wizard Revision 2 boards do not have all the components loaded as in the above image.

BADBOY Board Images

These are some of the earliest protos and are not representative of current boards available.

 

Click on the image to see the larger version

Front side image viewed under the microscope at 20X magnification.

 Click on the image to see the larger version.

Back side image viewed under the microscope at 20X magnification.
   

 

MadMax Board Images

Revision 5A Front view loaded PCB.

Revision 5A Backside with wires attached.
Click on image to see larger version.

Revision 5b front side view

NOTE:  Jumper pads A-B for full throttle (5V output).  Jumper pads A-C for Vout of 3.3V.

 Click on the image to see a larger version.

Revision 5b backside view

 
click on image to see a larger version.

Revision 5b Assembly with anode board open.

Revision 5b Assembly with anode board closed.

Revision 5b backside with Luxeon emitter soldered to board and with Arctic Alumina heat sink compound.