This page is not yet complete.
Had I known what was in store for me, I might not have undertaken all these projects
(although I learned a lot, in doing so).
Below is the result of years of neglect.
Before Repairs
All this water damage, is the result of cracks in the fiberglass top, that needed to be repaired first.
I did not realize till later, that I should have taken pictures of that repair.
I first had to remount the support rails to the bus top, that had been taken loose (due to all this damage I suppose). Whatsmore, I had to fabricate many parts that were missing. Among that which was missing, were all but one of the springs. I was able to find new ones, although they are not identical to the original.
Obviously, I had to prop up the top, until I remounted the supports, and installed all the springs. I also had to attempt to duplicate the rear frame, rail, and rollers, as they were missing too.
After Repairs
