HOME Bike Pictures Parts for Sale HOME

1980-82 CB900 & 1983 CB1000 Custom Parts to Trade or Sell
If the pictures are here I have it to sell.  I have other stuff listed too but need pictures for them.

 Pictures updated on 07/03/2008   Many of the CB900c and CB1000c parts are interchangeable for all years. Many parts will also fit the 750c, 750f, 900f, & 1100f.    
RearFender.jpg (45781 bytes)
Rear fender $10
for CB1000
RHandRail.jpg (37322 bytes)
Right hand frame rail $15
  BrakeMount.jpg (43036 bytes)
1000c Brake mount brackets $5
TimingAdv.jpg (30873 bytes)
Timing advance for CB1000c $10
OilCooler7.jpg (48683 bytes)
Oil cooler $15
(No oil lines)
 FrontTire4.jpg (54119 bytes)
Front tire $10 
100/90-18 56H(no idea what 56H is, composition maybe?) Durotour 310F Tread measures 3.82mm center, 3.36mm between center and edge, and 2.80mm at the far edge
 CB1000Case7.jpg (66644 bytes)CB1000Case8.jpg (69373 bytes)   CB1000Case3.jpg (71111 bytes)CB1000Case6.jpg (57506 bytes)
'83CB 1000c engine cases with bolts $20
 CB1000Case9.jpg (68682 bytes)
'83CB 1000c engine case with bolts $20
OilCooler8.jpg (55643 bytes)
1000c Oil cooler $15(fits 900c&F bikes)
    FilterCover2.jpg (32859 bytes)Filter Cover.jpg (67981 bytes)FilterCover1.jpg (38560 bytes)
Oil filter cover, bolt, & spring $10 
I have 3 of these.  Fits any '78-'83 DOHC
   
          
         
     I have these 1100F parts for sale:    

I also have:
Transmission $50
Crankshaft $30
Lower Triple clamp $10
Sprocket Cover.jpg (80794 bytes)Sprocket Cover1.jpg (75623 bytes)
Sprocket Cover $15
Dipstick cover.jpg (78364 bytes)
Oil pump cover w/dipstick $25
 
 


  Left Cover.jpg (77070 bytes)  Left Cover1.jpg (76776 bytes)
Ignition side engine cover $15
   
         
         
    I will buy or trade for the following CB1000 parts:
Progressive front springs #11-1102
Valve guide seals (and a complete gasket kit)
Nice grips,  Forged SS Hex bolt set, LED lights
   
  1100fhead002.jpg (61053 bytes)
900 custom head Maybe an early 900. 
1100fhead003.jpg (62887 bytes)
900 custom head
Looks like it has a 461 marking and has a 5  20   5  cast into it. Probably a 1980.  It was used on an 1100F
1100fhead005.jpg (98146 bytes)
900 custom head. Possible bearing problem
 
         
Dave's Tank expansion.  How awesome is this!?!
Some of you may remember that I sold a really beat up CB1000 tank.  Here's some pictures of what Dave is doing to it.  It's looking pretty good so far! TankEnlarge1.jpg (70855 bytes)
This shows where the badly dented areas were.  Unfortunately I didn't save the original pic of it.  It was UGLEE!
TankEnlarge2.jpg (71217 bytes)
Top view of the work so far.
TankEnlarge3.jpg (25012 bytes)
This really shows how much it's expanded.
TankEnlarge4.jpg (70885 bytes)
Another top view that shows more detail.
I'm guessing this will hold at least 1, maybe 2 more gallons than factory plus it will also extend reserve quite a bit.  I can't wait to see the finished product!
 
Here's some parts I've acquired for my project.
CBParts1.jpg (55865 bytes) Here's the covers --->
I'm going to put on my bike.  They are from the '83 CB1100F and I really like the way they look.
1100FLCover.jpg (104377 bytes) dynacovers.jpeg (29123 bytes)

 

 

 

 

 

           83CB100C.jpg (151692 bytes)
Here's my bike when I picked it up in June 2004.  This was from the ad I found.
83CB1000-01.jpg (116089 bytes)
This is after I had it ready to ride home.

I prefer PayPal for payment but I will consider Money orders or Cashiers Check if previous arrangements have been made.  I can use a PayPal invoice to bill you if paying by PayPal or you can send it to my account.  Buyer pays actual shipping cost.  Will ship internationally but shipping and duties can be expensive.  If you have questions or want more pictures please e-mail me at: zondar(at symbol here)comcast.net  

Page was last updated on 07/03/2008