__MUNCIE TRANS
INDENTIFICATION__

**Case casting numbers,
relating production years and ratios available**

Casting: 3831704 Years: 1963 Only Ratios: M20 2.56 1st , M21 2.20 1st

Casting: 3851325 Years: 1964 - 1965 Ratios: M20 2.56 1st , M21 2.20 1st

Casting: 3885010 Years: 1965 - 1967 Ratios: M20 2.52 1st , M21 2.20 1st, M22 2.20 1st

Casting: 3925660 Years: 1968 - 1970 Ratios: M20 2.52 1st , M21 2.20 1st, M22 2.20 1st

Casting: 3925661 Years: 1970 - 1974 Ratios: M20 2.52 1st , M21 2.20 1st, M22 2.20 1st

**Ratios
of the M20 , M21 , M22 **

Year 1963-1965 Type: M20 Rings: None Ratio: 2.56 / 1.91 / 1.48 / 1.00 / 3.16

Year 1966-1974 Type: M20 Rings: Two Ratio: 2.52 / 1.88 / 1.46 / 1.00 / 3.11

Year 1963-1974 Type: M21 Rings: One Ratio: 2.20 / 1.64 / 1.28 / 1.00 / 2.27

Year 1967-1974 Type: M22 Rings: None Ratio: 2.20 / 1.64 / 1.28 / 1.00 / 2.27

**Input
Shaft Tooth and Spline Count Related to Year**

Year 1963-1965 Type: M20 Rings: None Spline: 10 Tooth Count: 24

Year 1966-1970 Type: M20 Rings: Two Spline: 10 Tooth Count: 21

Year 1970-1974 Type: M20 Rings: Two Spline: 26 Tooth Count: 21

Year 1963-1970 Type: M21 Rings: One Spline: 10 Tooth Count: 26

Year 1970-1974 Type: M21 Rings: One Spline: 26 Tooth Count: 26

Year 1967-1970 Type: M22 Rings: None Spline: 10 Tooth Count: 26

Year 1969-1974 Type: M22 Rings: None Spline: 26 Tooth Count: 26

Please note that there are 7 different Muncie input shafts. All 26 spline inputs came with 32 spline output shafts and all 10 spline inputs came with 27 spline output shafts. A common mistake is thinking that all "fine spline" 26 spline input shafts are M22 heavy duty types. This is not true. An M22 gearbox has a 20 degree helix angle on the gearset as opposed to a 45 degree angle. Also M22 gear sets were of a higher nickel alloy. The straighter angle was designed to produce less end loading of the gear train and less heat but created more noise, thus the nickname "rockcrusher". The higher nickel alloy allowed for more impact of the gears. Another misconception is if you have a drain plug you have an M22. Again this was only true when the first M22 boxes were created. But all 3925661 castings had drain plugs.

**Reading
Serial and VIN Numbers**

Serial numbers for Muncie 4 speeds always begin with the letter "P". P stands for Muncie. Why.... I have no idea. The serial number is a date code the transmission was built for a particular year. Serial numbers from 1963 to 1966 included only the month and day. P0101 would indicate January 1st. From 1967 to 1968 the serial number got a year designator and a letter designator for the month such as P8A01, meaning January 1st 1968. One important point is that if you have a Muncie dated with a December build date it was actually built the prior year. An example would be the date code P8T13. This is for a 1968 production car. The T stands for December and 13 is the day. To confirm this simply look at the VIN number. It will usually begin with a 18S101350 or a 28N12950. This means the Muncie was assembled December 13, 1967 for the 1968 model year. The VIN number will usually be a low number. 1969 to 1974 Muncies got a ratio designator at the end of the serial number. An example would be P4D23B. This equates to April 23, 1974, M21 ratio.

**Month
Code Chart**

January Letter: A May Letter: E September Letter: P

February Letter: B June Letter: H October Letter: R

March Letter: C July Letter: K November Letter: S

April Letter: D August Letter: M December Letter: T

**Ratio
Code Chart**

`Letter: A M20 Ratio`

`Letter: B M21 Ratio`

`Letter: C M22 Ratio`